Asko W600 User manual Quick Start Guide EN - Page 1

Asko W600 Manual

Page 1 highlights

Quick Start Guide W600 We know you’re excited about owning an ASKO washing machine and you’re anxious to get started, so here is a brief summary of the operating procedures. To get the most of the features of your machine, we recommend that you read your Use and Care Guide. THE CONTROL PANEL Door Open Button Press to open the glass door. Please note that the Program Control knob must be at the end of a program (at a red mark) to open the glass door. Economy Button Press to extend the wash time by 22 minutes. (Suggested for use only with the low wash temperatures.) Temperature Control Turn clockwise to set the wash temperature. Power Indicator Light Glows when the power is turned on. Power Button Press to turn on power to the machine. ˚F 205 85 175 105 160 120 140 Super Rinse Button Press to program seven rinses. No Spin Button Press to omit the spin cycles. 800 RPM Spin Button Press to reduce spin speed from 1000 rpm to 800 rpm. Program Control Turn clockwise to select a program. Power Button The Power button turns the power to the machine on and off. When the power is on, the power indicator light glows red. The power must be on before you can open the inner door, set the programs or start the machine. Door Open Button The power must be on and you must press this button to open the glass door. There will be a few seconds delay before the door opens. Please note that the Program Control knob must be at the end of a program (at a red mark) to open the glass door. (See also, “Interrupting or Changing a Program” on the next page.) For instructions on how to open the door manually in case of mechanical failure, refer to your Use and Care Guide. PROGRAMS AND OPTIONS Your ASKO washer has several programs and options specifically designed to give you the cleanest laundry possible. The tables below define each program and option. The C and S on the Program Control are fault codes, which are explained on the next page. Program Number 1 2 3 4 5 6 7 8 9 10 Program White cotton w/prewash White cotton w/short prewash Normal Rinse Long spin Permanent Press/Synthetics Super quick wash Short spin Wool/Hand wash Drain Types of Laundry For heavily soiled cotton For normally soiled cotton For lightly soiled cottons and colorfast fabrics Recommended Temp. Range (° F) 140–205 140–205 105–140 For acrylic, polyester For lightly soiled fabrics For silk, nylon, washable wool 105–140 85–105 85–105 CAUTION! Some fabrics may not be able to withstand extremely hot temperatures. Please refer to the Recommended Wash Temperatures chart in the Use and Care Guide. Option 7 E2 800 Definition Super Rinse – Provides two additional rinses. Recommended for persons with sensitive skin or allergies. Economy – Extends the main wash time by 22 minutes. When used with low wash temperatures (85°–100° F), this program conserves energy but gives the same high level of cleaning. Note: You can only use this option with programs 1, 2, and 3. Reduces the spin speed from 1000 rpm to 800 rpm. No Spin – Omits the spin cycles in all programs. Programs 1–4 will drain the water after the last rinse. Programs 6, 7, and 9 will stop with water still in the machine. Set the Program Control knob to 10 to drain the water.

  • 1
  • 2

140
85
105
120
160
175
205
˚F
Power Button
The Power button turns the power to the machine on and off. When the power is on, the power indicator light glows red.
The power must be on before you can open the inner door, set the programs or start the machine.
Door Open Button
The power must be on and you must press this button to open the glass door. There will be a few seconds delay before the
door opens. Please note that the Program Control knob must be at the end of a program (at a red mark) to open the glass door.
(See also, ±Interrupting or Changing a Program² on the next page.)
For instructions on how to open the door manually in case of mechanical failure, refer to your
Use and Care Guide
.
We know you³re excited about owning an ASKO washing machine and you³re anxious to get started, so here is a brief summary of the
operating procedures. To get the most of the features of your machine, we recommend that you read your
Use and Care Guide
.
THE CONTROL PANEL
Door Open Button
Press to open the glass door. Please note that the
Program Control knob must be at the end of a
program (at a red mark) to open the glass door.
Super Rinse Button
Press to program
seven rinses.
Economy Button
Press to extend the wash time by
22 minutes. (Suggested for use only
with the low wash temperatures.)
Quick Start Guide
W600
Power Button
Press to turn on power
to the machine.
Program Control
Turn clockwise to select
a program.
Power Indicator Light
Glows when the power
is turned on.
Temperature Control
Turn clockwise to set the
wash temperature.
800 RPM Spin Button
Press to reduce spin speed
from 1000 rpm to 800 rpm.
No Spin Button
Press to omit the
spin cycles.
Program
Recommended
Number
Program
Types of Laundry
Temp. Range (° F)
1
White cotton w/prewash
For heavily soiled cotton
140´205
2
White cotton w/short prewash
For normally soiled cotton
140´205
3
Normal
For lightly soiled cottons and colorfast fabrics
105´140
4
Rinse
5
Long spin
6
Permanent Press/Synthetics
For acrylic, polyester
105´140
7
Super quick wash
For lightly soiled fabrics
85´105
8
Short spin
9
Wool/Hand wash
For silk, nylon, washable wool
85´105
10
Drain
CAUTION!
Some fabrics may not be able to withstand extremely hot temperatures. Please refer
to the Recommended Wash Temperatures chart in the
Use and Care Guide
.
PROGRAMS AND OPTIONS
Your ASKO washer has several programs and options specifically designed to give you the cleanest laundry possible. The tables below
define each program and option. The
C
and
S
on the Program Control are fault codes, which are explained on the next page.
Definition
Option
Super Rinse
´ Provides two additional rinses. Recommended for persons with sensitive skin or allergies.
Economy
´ Extends the main wash time by 22 minutes. When used with low wash temperatures (85°´100° F), this program
conserves energy but gives the same high level of cleaning.
Note:
You can only use this option with programs 1, 2, and 3.
Reduces the spin speed from 1000 rpm to 800 rpm.
800
No Spin
´ Omits the spin cycles in all programs. Programs 1´4 will drain the water after the last rinse. Programs 6,
7, and 9 will stop with water still in the machine. Set the Program Control knob to 10 to drain the water.
7
E
2