Asko W640 User manual Quick Start Guide EN

P4

P1

P2

P3

Menu

Enter

Start/Stop

THE CONTROL PANEL

Models W660 and W640 have ASKO±s state-of-the-art EasyControl² panel, as illustrated below. To select a wash program, simply press

one of the preset program buttons then press Start. Refer to ³Preset Programs´ below for a definition of these programs.

Door Open Button

Press to open the

glass door.

Preset Programs

Press one of these buttons to

select a program.

LED Window

Displays the wash program, spin speed,

temperature settings, and program run time.

Power Button

Press to turn on

power to the

machine.

Program Selection Controls

These buttons allow you to customize the preset program settings,

such as wash temperatures, spin speed, rinses, display language,

etc. Refer to the

Use and Care Guide

for instructions.

Power Indicator Light

Glows when the power

is turned on.

Start/Stop Button

Press to start or

stop a program.

Preset Programs

This model has four preset programs, as defined in the table below. To select a program, simply press one of the program buttons then press Start.

Preset

Wash

Spin

# of

Short

Long

Program

Wash Cycle

Types of Laundry

Temp

(1)

Speed

(1)

(2)

Rinses

Spin

Spin

P1

(3)

Normal

White cotton

140° F

1600 rpm

(4)

5

2

yes

P2

(3)

Normal

Normal/Perm Press

105° F

1600 rpm

(4)

5

2

yes

P3

Super Quick

Lightly soiled fabrics

105° F

1600 rpm

(4)

2

0

yes

P4

Wool/Hand

Washable wool, silk, nylon

85° F

800 rpm

3

1

no

NOTES:

(1)

You can temporarily adjust the temperature settings and spin speed. (See ³Temporary Program Changes´ below.)

(2)

These are the maximum spin speed settings allowed for the program (except Super Quick).

(3)

P1 and P2 are factory-programmed with a Quick Main Wash. (See the

Use and Care Guide

.)

(4)

Model W640 has a maximum spin speed of 1400 rpm.

Temporary Program Changes

You can make temporary changes to the wash temperature and/or spin speed on the preset programs. Simply press the button for the preset

program you want to use then follow the instructions below. The settings will revert to normal at the end of the program.

Temperature

µ Press

until the desired temperature displays in the LED window. If you also want to change the spin speed, read the

following paragraph, otherwise, press Start.

Spin Speed

µ Press

until the desired spin speed displays in the LED window then press Start.

You can easily customize the preset programs to best fit your laundry needs. See ³Customizing the Preset Programs´ in your

Use and Care Guide

.

Power Button

The Power button turns the power to the machine on and off. When the power is on, the power indicator light glows red. The power

must be on before you can open the glass door, set the programs or start the machine.

Start/Stop Button

This button starts or stops a program. To stop a program, press and hold this button for a few seconds. If you stop a program using

the Start/Stop button, you will have to reselect a program and press Start/Stop to restart the machine.

Door Open Button

The power must be on and you must press this button to open the glass door. There will be a few seconds delay before the door opens.

If you need to open the door during a wash or rinse cycle, press and hold Door Open for a few seconds. The machine will stop and

automatically drain enough water so the door can be opened safely. The program will resume when you close the door. For instructions

on how to open the door manually in case of power failure, refer to your

Use and Care Guide

.

We know you±re excited about owning an ASKO washing machine and you±re anxious to get started, so here is a brief summary of the

operating procedures. To get the most of the features of your machine, we recommend that you read your

Use and Care Guide

.

Washer Quick Start Guide

W640/W660

Start/Stop

Asko W640 User manual Quick Start Guide EN

Asko W640 Manual

Asko W640 manual content summary: