Asko W640 User manual Quick Start Guide EN - Page 1

Washer Quick Start Guide W640/W660 We know you’re excited about owning an ASKO washing machine and you’re anxious to get started, so here is a brief summary of the operating procedures. To get the most of the features of your machine, we recommend that you read your Use and Care Guide. THE CONTROL PANEL Models W660 and W640 have ASKO’s state-of-the-art EasyControl™ panel, as illustrated below. To select a wash program, simply press one of the preset program buttons then press Start. Refer to “Preset Programs” below for a definition of these programs. Power Button Press to turn on power to the machine. Preset Programs Press one of these buttons to select a program. P1 P2 P3 P4 LED Window Displays the wash program, spin speed, temperature settings, and program run time. Power Indicator Light Glows when the power is turned on. Start/Stop Menu Enter Start/Stop Button Press to start or stop a program. Door Open Button Press to open the glass door. Program Selection Controls These buttons allow you to customize the preset program settings, such as wash temperatures, spin speed, rinses, display language, etc. Refer to the Use and Care Guide for instructions. Power Button The Power button turns the power to the machine on and off. When the power is on, the power indicator light glows red. The power must be on before you can open the glass door, set the programs or start the machine. Start/Stop Button Start/Stop This button starts or stops a program. To stop a program, press and hold this button for a few seconds. If you stop a program using the Start/Stop button, you will have to reselect a program and press Start/Stop to restart the machine. Door Open Button The power must be on and you must press this button to open the glass door. There will be a few seconds delay before the door opens. If you need to open the door during a wash or rinse cycle, press and hold Door Open for a few seconds. The machine will stop and automatically drain enough water so the door can be opened safely. The program will resume when you close the door. For instructions on how to open the door manually in case of power failure, refer to your Use and Care Guide. Preset Programs This model has four preset programs, as defined in the table below. To select a program, simply press one of the program buttons then press Start. Preset Program P1 (3) P2 (3) P3 P4 Wash Cycle Normal Normal Super Quick Wool/Hand Types of Laundry White cotton Normal/Perm Press Lightly soiled fabrics Washable wool, silk, nylon Wash Temp (1) 140° F 105° F 105° F 85° F Spin Speed (1) (2) 1600 rpm (4) 1600 rpm (4) 1600 rpm (4) 800 rpm # of Rinses 5 5 2 3 Short Spin 2 2 0 1 Long Spin yes yes yes no NOTES: (1) You can temporarily adjust the temperature settings and spin speed. (See “Temporary Program Changes” below.) (2) These are the maximum spin speed settings allowed for the program (except Super Quick). (3) P1 and P2 are factory-programmed with a Quick Main Wash. (See the Use and Care Guide.) (4) Model W640 has a maximum spin speed of 1400 rpm. You can easily customize the preset programs to best fit your laundry needs. See “Customizing the Preset Programs” in your Use and Care Guide. Temporar y Program Changes You can make temporary changes to the wash temperature and/or spin speed on the preset programs. Simply press the button for the preset program you want to use then follow the instructions below. The settings will revert to normal at the end of the program. Temperature – Press until the desired temperature displays in the LED window. If you also want to change the spin speed, read the following paragraph, otherwise, press Start. Spin Speed – Press until the desired spin speed displays in the LED window then press Start.