Asko W6984 User manual 80 888 83 Asko W6984 EN - Page 37

Reversing the door You can choose whether the cover door is hung on the right or the left. Follow these instructions: 1. Remove the cover door by undoing the four screws. The door is attached to two plastic mounts. Pull straight out. 4. Reattach the cover plates on the other side of the machine. 5. Undo the screws holding the cover plates for the steel door. Reattach them on the other side. 4x 2x 4x 2. Remove the cover plates from the machine by pushing them sideways. Whether to the right or the left depends on how the door is fitted to the machine. 6. Reattach the hinges on the other side of the machine. Then reattach the steel door. 7. Remove the glued plastic guards from the top edge of the cover door and move them to the bottom edge (if the door needs to be rotated 180 degrees). 2x 3. Remove the door from the hinges (A). Then unscrew the hinge from the machine (B). A 2x B 2x 2x 8. Refit the cover door. Customer Care Center 37 1-800-898-1879 www.askousa.com