Asus A7A133 A7A133 User Manual - Page 18

ASUS A7A133 User's Manual, Voltage Regulator Output Setting VID, the CPU Default, CPU Default, Bass - motherboard driver

Get Asus A7A133 PDF manuals and user guides View all Asus A7A133 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

3. H/W SETUP Motherboard Settings 3. HARDWARE SETUP 2) Voltage Regulator Output Setting (VID) This jumper allows you to manually adjust the CPU core voltage. It is better to use the CPU Default for the CPU core voltage. CPU Default means the Vcore is generated according to the CPU VID configuration. Disabling the Voltage regulator output allows higher voltage settings to be made; however care must be exercised not to damage the CPU. A7A133 A7A133 VID Selection VID Enable (Default) Disable 12 23 3) Bass Center Setting (BCS1, BCS2) Use these jumpers in conjunction with the C-Media PCI Audio Driver to adjust output for 6 speaker audio. No audio standard exists for the three pick-up surfaces on male audio jacks, therefore it may be necessary to switch jumpers from the default position to reroute signals among the internal leads to the LineIn, Line-Out, Mic female sockets. Make sure a test is made using the C-Media Audio Driver software setup available on the Support CD. These jumpers effectively swap the audio channels for bass and center. BCS1 BCS1 BCS2 BCS2 A7A133 12 23 (BASS/CENTER) (Default) (CENTER/BASS) A7A133 Bass Center Setting 18 ASUS A7A133 User's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
ASUS A7A133 User’s Manual
3. HARDWARE SETUP
18
2)
Voltage Regulator Output Setting (VID)
This jumper allows you to manually adjust the CPU core voltage.
It is better to
use
the CPU Default
for the CPU core voltage.
CPU Default
means the Vcore
is generated according to the CPU VID configuration.
Disabling the Voltage
regulator output allows higher voltage settings to be made; however care must
be exercised not to damage the CPU.
A7A133
A7A133 VID Selection
Enable
(Default)
VID
Disable
23
12
3)
Bass Center Setting (BCS1, BCS2)
Use these jumpers in conjunction with the C-Media PCI Audio Driver
to adjust
output for 6 speaker audio.
No audio standard exists for the three pick-up
surfaces on male audio jacks, therefore it may be necessary to switch jumpers
from the default position to reroute signals among the internal leads to the Line-
In, Line-Out, Mic female sockets
.
Make sure a test is made using the C-Media
Audio Driver software setup available on the Support CD.
These jumpers
effectively swap the audio channels for bass and center.
A7A133
A7A133 Bass Center Setting
(CENTER/BASS)
2
3
BCS1
BCS2
(BASS/CENTER)
(Default)
12
BCS1
BCS2
Motherboard Settings
3. H/W SETUP