Asus A7M266 Motherboard DIY Troubleshooting Guide - Page 38

ASUS A7M266 User's Manual, Wake-On-LAN Connector 3-pin WOLCON, IMPORTANT, Wake-On-LAN or PCI Modem,

Get Asus A7M266 PDF manuals and user guides View all Asus A7M266 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

3. H/W SETUP Connectors 01 01 01 01 3. HARDWARE SETUP 13) Wake-On-LAN Connector (3-pin WOLCON) This connector connects to a LAN card with a Wake-On-LAN output, such as the ASUS PCI-L101 Ethernet card (see 7. Appendix). The connector powers up the system when a wakeup packet or signal is received through the LAN card. IMPORTANT: This feature requires that the Wake-On-LAN or PCI Modem feature is enabled (see 4.5.1 Power Up Control) and that your system has an ATX power supply with at least 720mA +5V standby power. A7M266 ® IMPORTANT: Requires an ATX power supply with at least 720mA +5 volt standby power WOLCON Ground PME +5 Volt Standby A7M266 Wake-On-LAN Connector 14) Wake-On-Ring Connector (2-pin WOR) This connector connects to internal modem cards with a Wake-On-Ring output. The connector powers up the system when a ringup packet or signal is received through the internal modem card. NOTE: For external modems, Wake-On-Ring is detected through the COM port. IMPORTANT: This feature requires that the Wake-On-LAN or PCI Modem feature is enabled (see 4.5.1 Power Up Control) and that your system has an ATX power supply with at least 720mA +5V standby power. A7M266 ® WOR 1 Ground 2 Ring# A7M266 Wake-On-Ring Connector 38 ASUS A7M266 User's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
38
ASUS A7M266 User’s Manual
Connectors
3. H/W SETUP
3. HARDWARE SETUP
13) Wake-On-LAN Connector (3-pin WOLCON)
This connector connects to a LAN card with a Wake-On-LAN output, such as
the ASUS PCI-L101 Ethernet card (see
7. Appendix
). The connector powers up
the system when a wakeup packet or signal is received through the LAN card.
IMPORTANT:
This feature requires that the
Wake-On-LAN or PCI Modem
feature is enabled (see
4.5.1 Power Up Control
) and that
y
our system has an
ATX power supply with at least 720mA +5V standby power.
0
1
0
1
A7M266
A7M266 Wake-On-LAN Connector
IMPORTANT:
Requires an ATX power
supply with at least 720mA +5 volt
standby power
WOLCON
+5 Volt Standby
PME
Ground
14) Wake-On-Ring Connector (2-pin WOR)
This connector connects to internal modem cards with a Wake-On-Ring output.
The connector powers up the system when a ringup packet or signal is received
through the internal modem card.
NOTE:
For external modems, Wake-On-Ring
is detected through the COM port.
IMPORTANT:
This feature requires that the
Wake-On-LAN or PCI Modem
feature is enabled (see
4.5.1 Power Up Control
)
and that your system has an
ATX power supply with at least 720mA +5V standby power.
0
1
0
1
A7M266
A7M266 Wake-On-Ring Connector
WOR
Ring#
Ground
2
1