Asus A7N8X-E Deluxe A7N8X-E Deluxe User's Manual - Page 37

ASUS A7N8X-E Deluxe motherboard, Clear RTC RAM CLRTC1, Serial ATA setting, pin SATA_EN1 - deluxe bios

Get Asus A7N8X-E Deluxe PDF manuals and user guides View all Asus A7N8X-E Deluxe manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

5. Clear RTC RAM (CLRTC1) This jumper clears the Real Time Clock (RTC) RAM of date, time, and system setup parameters in CMOS. The RAM data in CMOS is powered by the onboard button cell battery. To erase the RTC RAM: 1. Turn OFF the computer and unplug the power cord. 2. Remove the battery. 3. Move the jumper caps from pins 1-2 (default) to pins 2-3. Keep the cap on pins 2-3 for about 5~10 seconds then move the cap back to pins 1-2. 4. Replace the battery. 5. Plug the power cord and turn ON the computer. 6. Hold down the key during the boot process and enter BIOS setup to re-enter data. A7N8X-E ® A7N8X-E Clear RTC RAM CLRTC1 12 23 Normal (Default) Clear CMOS 6. Serial ATA setting (3-pin SATA_EN1) This jumper enables or disables the Serial ATA controllers. A7N8X-E ® A7N8X-E SATA Setting SATA_EN1 12 Enable (Default) 23 Disable ASUS A7N8X-E Deluxe motherboard 2-17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
ASUS A7N8X-E Deluxe motherboard
2-17
5.
Clear RTC RAM (CLRTC1)
This jumper clears the Real Time Clock (RTC) RAM of date, time, and
system setup parameters in CMOS. The RAM data in CMOS is
powered by the onboard button cell battery.
To erase the RTC RAM:
1.
Turn OFF the computer and unplug the power cord.
2.
Remove the battery.
3.
Move the jumper caps from pins 1-2 (default) to pins 2-3. Keep the
cap on pins 2-3 for about 5~10 seconds then move the cap back to
pins 1-2.
4.
Replace the battery.
5.
Plug the power cord and turn ON the computer.
6.
Hold down the <Del> key during the boot process and enter BIOS
setup to re-enter data.
A7N8X-E
A7N8X-E Clear RTC RAM
CLRTC1
Normal
Clear CMOS
(Default)
23
12
A7N8X-E
A7N8X-E SATA Setting
SATA_EN1
Enable
(Default)
Disable
12
23
6.
Serial ATA setting
(3-pin SATA_EN1)
This jumper enables or disables the Serial ATA controllers.