Asus A85XM-A A85XM-A User's Manual - Page 32
A85XM-A USB device wake-up - cpu
View all Asus A85XM-A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
2. Keyboard wake-up (3-pin KB_USBPWB) This jumper allows you to enable or disable the keyboard wake-up feature. When you set this jumper to pins 2-3 (+5VSB), you can wake up the computer by pressing a key on the keyboard. This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS. KB_USBPWB 12 23 A85XM-A +5V +5VSB (Default) A85XM-A Keyboard wake-up 3. USB device wake-up (3-pin USBPWF) Set this jumper to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices. Set to +5VSB to wake up from S3 and S4 sleep modes (no power to CPU, DRAM in slow refresh, power supply in reduced power mode). A85XM-A USBPWF 12 23 +5V +5VSB (Default) A85XM-A USB device wake-up • The USB device wake-up feature requires a power supply that can provide 500mA on the +5VSB lead for each USB port; otherwise, the system would not power up. • The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal condition or in sleep mode. 1-20 Chapter 1: Product introduction