Asus A8N-SLI DLX User Manual - Page 106
Hardware Monitor
View all Asus A8N-SLI DLX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
4.5.4 Hardware Monitor The items in this sub-menu displays the hardware monitor values automatically detected by the BIOS. It also allows you to change CPU Q-Fan feature-related parameters. Select an item then press to display the configuration options. Phoenix-Award BIOS CMOS Setup Utility Power Q-Fan Controller Vcore Voltage 3.3V Voltage 5V Voltage 12V Voltage Hardware Monitor [Disabled] 1.50V 3.31V 4.94V 11.26V Select Menu Item Specific Help Press [Enter] to enable or disable CPU Temperature M/B Temperature CPU FAN Speed CHA1 FAN Speed CHIP FAN Speed x Q-Fan1 Stop Temperature x Q-Fan1 StartUp Temperature x Q-Fan1 Full Speed Temperature 48ºC 38ºC 4962 RPM 0 RPM 5443 RPM 20ºC 25ºC 72ºC F1:Help ESC: Exit ↑↓ : Select Item →←: Select Menu -/+: Change Value Enter: Select Sub-menu F5: Setup Defaults F10: Save and Exit Q-Fan Controller [Disabled] Allows you to enable or disable the Q-Fan controller. Configuration options: [Disabled] [Enabled] VCORE Voltage, +12V Voltage, 3.3V Voltage, 5VCC Voltage The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators. These items are not user-configurable. CPU Temperature, M/B Temperature The onboard hardware monitor automatically detects and displays the motherboard and CPU temperatures. These items are not user-configurable. CPU Fan Speed CHA1 Fan Speed CHIP Fan Speed The onboard hardware monitor automatically detects and displays the Chassis, CPU, and Chip fan speeds in rotations per minute (RPM). If the fan is not connected to the motherboard, the field shows 0. These items are not user-configurable. 4-38 Chapter 4: BIOS setup