Asus B150M-C D3 User Guide - Page 31
Installing an operating system, Windows, and USB 3.0 driver for 100 Series
View all Asus B150M-C D3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
1.9 Installing an operating system Motherboard settings and hardware options vary. The setup procedures presented in this chapter are for reference only. Refer to Windows® operating system documentation for detailed information. Windows® 7 and USB 3.0 driver for 100 Series Based on the chipset specification, the 100 series requires USB 3.0 drivers to be preloaded in order to use USB keyboard/mouse during Windows® 7 installation. This section is a guide on preloading USB 3.0 drivers and installing Windows® 7. Method 1: Using SATA ODD & USB devices Load USB 3.0 drivers using the ASUS support DVD and install Windows® 7 using a USB device. Requirement: • 1 x ASUS support DVD • 1 x Windows® 7 installation source • 1 x SATA ODD • 1 x USB device (ODD or storage) • The USB storage device requires 8 GB or more capacity. It is recommended to format the storage device before use. • Use both a USB ODD and a SATA ODD if you want to install Windows® 7 64-bit UEFI mode. 1. Insert the Windows® 7 installation DVD into a USB ODD, or copy all files on the Windows® 7 installation DVD to a USB storage device on a working system. 2. Connect the USB ODD or USB storage device to your 100 series platform. 3. Insert the ASUS support DVD into a SATA ODD on your 100 series platform. 4. Power on your system and press F8 during POST (Power-On Self Test) to enter the boot screen. ASUS B150M-C D3 1-23