Asus B85-PLUS USB 3.1 B85-PLUSUSB 31 users manual Simplified Chinese - Page 63
USB 設備設置(USB Configuration)
View all Asus B85-PLUS USB 3.1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
2.6.5 USB USB Configuration) USB USB Devices USB None]。 Legacy USB Support [Enabled] [Enabled] 開啟 Legacy USB [Disabled] USB BIOS [Auto] USB USB 控制器 legacy legacy USB Intel xHCI Mode [Smart Auto] [Auto] xHCI [Smart Auto xHCI [Enabled] [Disabled] EHCI Hand-off [Disabled] [Enabled] EHCI hand‑off [Disabled] Mass Storage Device Auto CDROM Auto] [Floppy] [Forced FDD] [Hard disk] [CD-ROM] USB Single Port Control USB 接口。 USB 3.1_EA1 [Enabled USB 3.1_EA1 Enabled] [Disabled] USB 3.1_EC1 [Enabled USB 3.1_EC1 Enabled] [Disabled] USB3_1, 2, 5, 6 [Enabled USB 1.2.3 USB Enabled] [Disabled]. USB_9~14 [Enabled USB 1.2.3 USB Enabled] [Disabled]. 華碩 B85-PLUS/USB 3.1 2-31
2-31
華碩 B85-PLUS/USB 3.1 主板用戶手冊
Legacy USB Support [Enabled]
[Enabled]
開啟 Legacy 操作系統對 USB 設備的支持。
[Disabled]
USB 設備僅在 BIOS 設置程序中可用。
[Auto]
允許系統在開機時偵測是否存在 USB 設備。若存在,USB 控制器
legacy 模式開啟。若不存在,legacy USB 支持功能關閉。
Intel xHCI Mode [Smart Auto]
[Auto]
啟動操作系統時保留 xHCI 控制器前一次的操作。
[Smart Auto]
允許執行 xHCI 控制器。
[Enabled]
開啟此功能。
[Disabled]
關閉此功能。
EHCI Hand-off [Disabled]
[Enabled]
開啟對不支持 EHCI hand-off 功能的操作系統支持。
[Disabled]
關閉此功能。
Mass Storage Device
本項目用來設置大容量存儲設備的仿真類型。選擇【Auto】依據媒體格式仿真
設備。 光驅仿真模式為“CDROM”。 無媒體格式的光驅會依據其光驅類型進行仿
真。設置值有:[Auto] [Floppy] [Forced FDD] [Hard disk] [CD-ROM]
USB Devices 項目顯示自動偵測到的 USB 設備。若無連接任何設備,則
會顯示 [None]。
2.6.5
USB 設備設置(USB Configuration)
本菜單可讓您變更 USB 設備的各項相關設置。
USB Single Port Control
本項目用來開啟或關閉單獨的 USB 接口。
USB 3.1_EA1 [Enabled]
本項目用來開啟或關閉 USB 3.1_EA1 接口。設置值有: [Enabled] [Disabled]
USB 3.1_EC1 [Enabled]
本項目用來開啟或關閉 USB 3.1_EC1 接口。設置值有: [Enabled] [Disabled]
USB3_1, 2, 5, 6 [Enabled]
本項目用來開啟或關閉單獨的 USB 接口。請參考“1.2.3 主板結構圖”了解
USB 接口的具體位置。設置值有:[Enabled] [Disabled].
USB_9~14 [Enabled]
本項目用來開啟或關閉單獨的 USB 接口。請參考“1.2.3 主板結構圖”了解
USB 接口的具體位置。設置值有:[Enabled] [Disabled].