Asus CD-S520 A4 Quick Installation Guide - Page 7
Hardware installation, English, Software installation - driver
View all Asus CD-S520 A4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
English Hardware installation 1. Turn off your computer and any peripheral devices connected to it. 2. Use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, before handling the optical drive to avoid damaging it due to static electricity. 3. Remove the computer cover. 4. For optical drives with IDE interface, configure the optical drive jumpers to set the device to master or slave mode before installing it into the chassis. Use jumper blocks to short the pins to your desired setting. 5. Insert the optical drive into an available 5.25-inch bay. 6. Connect a 4-pin IDE/SATA power supply cable to the DC input connector of the optical drive. 7. Connect one end of the IDE/SATA ribbon cable to the IDE/SATA connector at the back of the optical drive, matching the colored stripe on the cable with Pin 1 on the IDE connector. Connect the other end of the IDE/SATA cable to the IDE/SATA connector on the motherboard. 8. Connect one end of the 4-pin audio cable to the audio output connector of the optical drive. Connect the other end to the audio connector of an installed sound card, or to the audio connector on the motherboard, if available. 9. Slide the optical drive into the bay and secure it with four screws. 10. Replace the computer cover. 11. Turn on your computer. Software installation Windows® 98 SE/2000/Me/XP automatically detects the current settings for your drive and installs the appropriate driver. Internal Optical Drive 7