Asus CRW-2410A ASUS CRW-2410A Manual - Page 14

Front Panel

Page 14 highlights

Front Panel ¤ 24x10x40x High Speed Recordable Rewritable W R 1 2 3 456 7 8 1. Headphone jack This jack allows you to connect a headphone with a stereo mini-plug. 2. Headphone volume dial This volume dial allows you to control the volume of the headphone connected to the drive. Turning the dial to the left decreases the volume, turning to the right increases volume. 3. Disc tray This tray holds the disc. 4. WRITE indicator (Red LED) This LED flashes while data is being written on the disc. 5. READ indicator (Green LED) This LED turns ON when you place a disc on the drive tray, and stays ON until you remove the disc. The LED flashes while data is being read from the disc. 6. Emergency eject pinhole In cases when you cannot eject a disc from the drive using the eject button due to power failure or software problems, insert a pin or a paper clip into this hole to manually eject the tray and the disc. 7. PLAY/SKIP button This button has two functions. If the drive is idle, pressing this button will start playing an audio disc (if one is currenly loaded in the drive) from the first track. While in the PLAY mode, pressing this button lets you skip to the next track on the disc. 8. STOP/EJECT button This button has two functions. Pressing this button at any time ejects the disc tray so you can place or remove a disc. While in PLAY mode, pressing this button stops playing the disc loaded in the drive. 14 ASUS CRW-2410A User's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26

14
ASUS CRW-2410A User
s
Manual
Front Panel
1.
Headphone jack
This jack allows you to connect a headphone with a stereo mini-plug.
2.
Headphone volume dial
This volume dial allows you to control the volume of the headphone
connected to the drive. Turning the dial to the left decreases the
volume, turning
to the right increases volume.
3.
Disc tray
This tray holds the disc.
4.
WRITE indicator (Red LED)
This LED flashes while data is being written on the disc.
5.
READ indicator (Green LED)
This LED turns ON when you place a disc on the drive tray, and stays
ON until you remove the disc. The LED flashes while data is being
read from the disc.
6.
Emergency eject pinhole
In cases when you cannot eject a disc from the drive using the eject
button due to power failure or software problems, insert a pin or a
paper clip into this hole to manually eject the tray and the disc.
7.
PLAY/SKIP button
This button has two functions. If the drive is idle, pressing this button
will start playing an audio disc (if one is currenly loaded in the drive)
from the first track. While in the PLAY mode, pressing this button lets
you skip to the next track on the disc.
8.
STOP/EJECT button
This button has two functions. Pressing this button at any time ejects
the disc tray so you can place or remove a disc. While in PLAY mode,
pressing this button stops playing the disc loaded in the drive.
¤
Recordable
Recordable
Recordable
Rewritable
High Speed
1
2
24x10x40x
3
5
4
6
7
8
W
R