Asus CRW-3212A User Manual - Page 18

Technical Information

Page 18 highlights

Technical Information Environmental Specifications Temperature Operation: Storage: 5°C < to < 45°C - 20°C to < 60°C Humidity Operation: Storage: 20% to 80% non-condensing 15% to 85% non-condensing Vibration Operation: Storage: 0.3G peak at 5 ~ 500 Hz 2.0G peak at 10 ~ 500 Hz Impact Non-operation: Packaged: 1 oct/min - no damage Less than 50G - (at 11ms/half sine wave, 3 shock/each side) 1 oct/min - no damage 91 cm high - (1 corner, 3 edges, 6 surfaces) Acoustic Access mode: 41.5 dB TYP Read mode: 44.5 dB TYP (Microphone located 50cm in front of the drive, 120cm above the drive at 30° angle.) Reliability MTBF: ODC (Read): ODC (Write): 100,000 power on hours 20% of power on time 1% of power on time Mean Time To Repair (MTTR) 30 minutes * ODC - Operating Duty Cycle Electrical and Audio Specifications Power Source I/O Terminal Audio 26 Voltage Tolerance Ripple Rating +5V DC +/- 5% 150m Vpp 900mA +12V DC +/- 10% 300m Vpp 1500mA Power connector ATAPI terminal Audio out 4-pin +5V, +12V 40-pin 4-pin (analog) 2-pin (digital) No. of channels 2 (stereo) Sampling frequency 44.1 kHz Quantization 16 bits Distortion 0.2% max. (at 1 kHz) S/N ratio 70 dB Output: Headphone 0.7 V rms (typical) Line Out 0.7 V rms (typical) ASUS CRW-3212A User's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18

26
ASUS CRW-3212A User
s
Manual
Technical Information
Environmental Specifications
Temperature
Operation:
5
°
C < to < 45
°
C
Storage:
- 20
°
C to < 60
°
C
Humidity
Operation:
20% to 80% non-condensing
Storage:
15% to 85% non-condensing
Vibration
Operation:
0.3G peak at 5 ~ 500 Hz
Storage:
2.0G peak at 10 ~ 500 Hz
Impact
Non-operation:
1 oct/min
no damage
Less than 50G
(at 11ms/half sine wave,
3 shock/each side)
Packaged:
1 oct/min
no damage
91 cm high
(1 corner, 3 edges, 6 surfaces)
Acoustic
Access mode:
41.5 dB TYP
Read mode:
44.5 dB TYP
(Microphone located 50cm in front of the drive, 120cm above the drive at 30
°
angle.)
Reliability
MTBF:
100,000 power on hours
ODC (Read):
20% of power on time
ODC (Write):
1% of power on time
Mean Time To Repair (MTTR)
30 minutes
Electrical and Audio Specifications
Power Source
Voltage
+5V DC
+12V DC
Tolerance
+/- 5%
+/- 10%
Ripple
150m Vpp
300m Vpp
Rating
900mA
1500mA
I/O Terminal
Power connector
4-pin +5V, +12V
ATAPI terminal
40-pin
Audio out
4-pin (analog)
2-pin (digital)
Audio
No. of channels
2 (stereo)
Sampling frequency
44.1 kHz
Quantization
16 bits
Distortion
0.2% max. (at 1 kHz)
S/N ratio
70 dB
Output:
Headphone
0.7 V rms (typical)
Line Out
0.7 V rms (typical)
* ODC - Operating Duty Cycle