Asus CUWE-FX CUWE-FX User Manual - Page 35
ASUS CUWE-FX User's Manual, Serial and Consumer IR Connectors 10-pin IR_CON, UART2 Use In, frared,
View all Asus CUWE-FX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
3. H/W SETUP Connectors 3. HARDWARE SETUP 16) Serial and Consumer IR Connectors (10-pin IR_CON) This connector supports an optional wireless transmitting and receiving infrared module. This module mounts to a small opening on system cases that support this feature. You must also configure the setting through UART2 Use Infrared (see 4.4.2 I/O Device Configuration) to select whether UART2 is directed for use with COM2 or IrDA. Use the five pins as shown in Back View and connect a ribbon cable from the module to the motherboard's SIR connector according to the pin definitions. An optional consumer infrared (CIR) set connects to the CIR and SIR connectors simultaneously for both wireless transmitting and remote control functions through one external infrared module. Wake On PS2 KB/Mouse in 4.5.1 Power Up Control must be Enabled in order to use Consumer Infrared (CIR) power up. CUW(E)-FX ® IR_CON SIR CIR IRTX GND IRRX (NC) +5V CIR+5V CIRRX GND (NC) Standard Infrared (SIR) Front View Back View IRTX +5V GND (NC) IRRX CUW(E)-FX Infrared Module Connector 17) Serial COM 2 Port Header (10-1 pin COM2) The optional serial port bracket can be used to add a serial port for additional serial devices. COM2 CUW(E)-FX ® Pin 1 CUW(E)-FX Serial Port Header ASUS CUW(E)-FX User's Manual 35