Asus D700-NSB P4S333-VM User Manual - Page 48

13. System panel connector (20-pin HPANEL1) This connector accommodates several system front panel functions. Power LED Speaker Connector +5VSB PLED +5V Ground Ground Speaker P4S333-VM +5 V MLED ExtSMI# Ground PWR Ground Reset Ground Reset SW ® Message LED ATX Power SMI Lead Switch* * Requires an ATX power supply. P4S333-VM System Panel Connectors • System Power LED Lead (3-1 pin PLED) This 3-1 pin connector connects to the system power LED. The LED lights up when you turn on the system power, and blinks when the system is in sleep mode. • System Warning Speaker Lead (4-pin SPEAKER) This 4-pin connector connects to the case-mounted speaker and allows you to hear system beeps and warnings. • System Message LED Lead (2-pin MLED) This 2-pin connector is for the system message LED that indicates receipt of messages from a fax/modem. The normal status for this LED is ON, when there is no incoming data signal. The LED blinks when data is received. The system message LED feature requires an ACPI OS and driver support. • System Management Interrupt Lead (2-pin SMI) This 2-pin connector allows you to manually place the system into a suspend mode, or "green" mode, where system activity is instantly decreased to save power and to expand the life of certain system components. Attach the case-mounted suspend switch to this 2-pin connector. 2-26 Chapter 2: Hardware information