Asus DSL-N12E users manual - Page 30
Configuring the wide area network (WAN) settings, Configuring the WAN channel
View all Asus DSL-N12E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Configuring the wide area network (WAN) settings The WAN page allows you to configure your wide area network (WAN) settings. Configuring the WAN channel The Channel Configuration page allows you to configure the Internet settings in WAN channel. To configure the WAN settings: 1. Click Network > WAN tab > WAN. . In the Default Route Selection field, select Auto or Specified. . In the VPI field, key in the virtual path values for the asynchronous transfer mode ranging from 0 to 255. 4. In the VCI field, key in the virtual channel values for the asynchronous transfer mode ranging from 32 to 65535. 5. In the Encapsulation dropdown list, select LLC or VC-Mux. 6. In the Channel Mode dropdown list, select 1483 Bridged, 1483 MER, PPPoE, PPPoA, 1483 Routed, or IPoA. 7. Tick Enable NAPT to enable Network Address Port Translation function. Tick Enable IGMP to enable Internet Group Management Protocol function. To configure the PPP settings: 1. In the User Name and Password fields, key in a user name and password provided by your ISP. . In the Type dropdown list, you can select Continuous, Connect on Demand, or Manual. . In selecting the Connect on Demand type, key in the idle amount time in Idle Time (min) field to automatically disconnect the PPPoE connection. 30 DSL-N12E Chapter 4: Configuring via the web GUI