Asus DSL-N12U B1 users manual - Page 44
Restoring/Saving/Uploading settings, User Name, Password, Enable DHCP, IP address, Domain Name
View all Asus DSL-N12U B1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
If the ADSL "LINK" light blinks continuously or stays off, Internet access is not possible - the Router is unable to establish a connection with the ADSL network. • Ensure that all your cables are all properly connected . • Disconnect the power cord from the ADSL or cable modem, wait a few minutes, then reconnect the cord. • If the ADSL light continues to blink or stays OFF, contact your ADSL service provider. Network name or encryption keys are forgotten. • Try setting up the wired connection and configuring the wireless encryption again. • Press the Reset button at the rear panel of the ADSL router for more than five seconds. How to restore the system to its default settings? • Press the Reset button at the rear panel of the ADSL router for more than five seconds. • Refer to the section Restoring/Saving/Uploading settings in Chapter 3 of this user manual. The following are the factory default settings: User Name: admin Password: admin Enable DHCP: Yes (if WAN cable is plugged in) IP address: 192.168.1.1 Domain Name: (Blank) Subnet Mask: 255.255.255.0 DNS Server 1: 192.168.1.1 DNS Server 2: (Blank) SSID (2.4GHz): ASUS SSID (5GHz): ASUS_5G 44