Asus E2KM1I-DELUXE E2KM1I-DELUXE User's Manual - Page 54

Asmedia USB 3.0 Battery Charging Support [Disabled]

Page 54 highlights

The following two items appear only when you set the HD Audio Device item to [Enabled]. Front Panel Type [HD] Allows you to set the front panel audio connector (AAFP) mode to legacy AC'97 or highdefinition audio depending on the audio standard that the front panel audio module supports. [HD] Sets the front panel audio connector (AAFP) mode to high definition audio. [AC97] Sets the front panel audio connector (AAFP) mode to legacy AC'97 SPDIF Out Type [SPDIF] Allows you to select the digital audio output type. Configuartion options: [SPIDF] [HDMI] Realtek LAN Controller [Enabled] [Enabled] Enables the Realtek LAN controller. [Disabled] Disables the controller. Realtek PXE OPROM [Disabled] This item appears only when you set the previous item to [Enabled] and allows you to enable or disable the PXE OptionRom of the Realtek LAN controller. Configuration options: [Enabled] [Disabled] Asmedia USB 3.0 Controller [Enabled] [Enabled] Enables the onboard USB 3.0 controller. [Disabled] Disables the controller. Asmedia USB 3.0 Battery Charging Support [Disabled] This item appears only when the Asmedia USB 3.0 Controller item is set to [Enabled]. [Enabled] Enables the Asmedia USB 3.0 battery charging function. [Disabled] Disables this function. Wi-Fi Controller [Enabled] [Enabled] Enables the Wi-Fi controller. [Disabled] Disables the controller. Bluetooth Controller [Enabled] [Enabled] Enables the Bluetooth controller. [Disabled] Disables the controller. 2.5.6 APM EuP Ready [Enabled] [Disabled] Disables the Energy Using Products (EuP) Ready function. [Enabled] Allows BIOS to switch off some power at S5 state to get the system ready for the EuP requirement. When set to [Enabled], all other PME options will be switched off. 2-18 Chapter 2: Getting started

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70

2-18
Chapter 2: Getting started
The following two items appear only when you set the
HD Audio Device
item to [Enabled].
Front Panel Type [HD]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or high-
definition audio depending on the audio standard that the front panel audio module supports.
[HD]
Sets the front panel audio connector (AAFP) mode to high definition audio.
[AC97]
Sets the front panel audio connector (AAFP) mode to legacy AC’97
SPDIF Out Type [SPDIF]
Allows you to select the digital audio output type. Configuartion options: [SPIDF] [HDMI]
Realtek LAN Controller [Enabled]
[Enabled]
Enables the Realtek LAN controller.
[Disabled]
Disables the controller.
Realtek PXE OPROM [Disabled]
This item appears only when you set the previous item to [Enabled] and allows you to
enable or disable the PXE OptionRom of the Realtek LAN controller. Configuration options:
[Enabled] [Disabled]
Asmedia USB 3.0 Controller [Enabled]
[Enabled]
Enables the onboard USB 3.0 controller.
[Disabled]
Disables the controller.
Asmedia USB 3.0 Battery Charging Support [Disabled]
This item appears only when the
Asmedia USB 3.0 Controller
item is set to
[Enabled]
.
[Enabled]
Enables the Asmedia USB 3.0 battery charging function.
[Disabled]
Disables this function.
Wi-Fi Controller [Enabled]
[Enabled]
Enables the Wi-Fi controller.
[Disabled]
Disables the controller.
Bluetooth Controller [Enabled]
[Enabled]
Enables the Bluetooth controller.
[Disabled]
Disables the controller.
2.5.6
APM
EuP Ready [Enabled]
[Disabled]
Disables the Energy Using Products (EuP) Ready function.
[Enabled]
Allows BIOS to switch off some power at S5 state to get the system ready
for the EuP requirement. When set to [Enabled], all other PME options will
be switched off.