Asus ESC4000 FDR G2 User Guide - Page 48
NVIDIA, Tesla™ GPU computing modules optional
View all Asus ESC4000 FDR G2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
2.8.4. NVIDIA® Tesla™ GPU computing modules (optional) Follow the steps below to install the optional NVIDIA® Tesla™ GPU computing modules to the system. 1. Locate and loosen the thumbscrew in front of the NVIDIA® Tesla™ GPU computing module bracket. 2. Firmly hold the bracket, and then pull it up to detach it from the motherboard. 3. Connect the red end of the 8-pin power cable to the power connector on the GPU computing module. 4. Thread the white end of the 8-pin power cable through the airduct of the GPU computing module. 2-26 Chapter 2: Hardware setup
Chapter 2:
Hardware setup
2-26
2.8.4.
NVIDIA
®
Tesla™ GPU computing modules (optional)
Follow the steps below to install the optional NVIDIA
®
Tesla™ GPU computing
modules to the system.
1.
Locate and loosen the thumbscrew
in front of the NVIDIA
®
Tesla™ GPU
computing module bracket.
2.
Firmly hold the bracket, and then
pull it up to detach it from the
motherboard.
4.
Thread the white end of the 8-pin
power cable through the airduct of
the GPU computing module.
3.
Connect the red end of the 8-pin
power cable to the power connector
on the GPU computing module.