Asus ESC4000 G4 Series User Manual - Page 54
Installing an ASUS PIKE II card, To install an ASUS PIKE II card to the front of the system
View all Asus ESC4000 G4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
2.5.2 Installing an ASUS PIKE II card You may install an ASUS PIKE II card to the internal SAS/HBA/Storage bracket located in the front of the system (ESC4000 G4 and ESC4000 G4S only) or the riser bracket located in the rear of the system. An additional Cache Vault Flash Module can also be installed in the ESC4000 G4 and ESC4000 G4S server systems. To install an ASUS PIKE II card to the front of the system: ESC4000 G4 1. Remove the default cable from the motherboard and the backplane. 2. Remove the screw from the bracket (A), then push the internal SAS/HBA/Storage bracket towards the rear to remove the internal SAS/HBA/Storage bracket (B). 2-26 Chapter 2: Hardware Setup
Chapter 2: Hardware Setup
2-26
2.5.2
Installing an ASUS PIKE II card
To install an ASUS PIKE II card to the front of the system:
ESC4000 G4
You may install an ASUS PIKE II card to the internal SAS/HBA/Storage bracket located in
the front of the system (ESC4000 G4 and ESC4000 G4S only) or the riser bracket located in
the rear of the system. An additional Cache Vault Flash Module can also be installed in the
ESC4000 G4 and ESC4000 G4S server systems.
1.
Remove the default cable from the motherboard and the backplane.
2.
Remove the screw from the bracket (A), then push the internal SAS/HBA/Storage
bracket towards the rear to remove the internal SAS/HBA/Storage bracket (B).