Asus ET2700INTS ET2700I series user's Manual for English Edition - Page 33

E-SATA English 4. If your laptop / desktop PC has no HDMI support, prepare a male-to-male VGA cable and a male-to-male stereo audio cable. Connect one end of the VGA cable and audio cable to your laptop / desktop PC, and connect the other end of the VGA cable to the Displayinput port on the rear side of the All-in-one PC, and the other end of the audio cable to the microphone jack on the side of the All-in-one PC. 5. An Input Select OSD menu appears when you connect the HDMI or VGA cable to the rear HDMI-input or Display-input port. Use the Volume Increase ( ) / Decrease ( ) buttons to select HDMI with Device Share or VGA with Device Share press the MENU button to activate the option. • The Device Share function supports a Microsoft Windows®-based laptop / desktop PC only. • By default, your All-in-one PC is set to PC mode (All-in-one PC is the display input source). The touch screen, webcam and rear USB ports will be controlled by the All-in-one PC even if the Device Share function is enabled. • When switching the display input source to HDMI or VGA (using your All-in-one PC as a desktop LCD monitor), the touch screen, webcam and rear USB ports will be controlled by the external laptop / desktop PC if the Device Share function is enabled. • When using the Device Share function, it is strongly recommended to connect ONLY a USB mouse or keyboard to the rear USB ports. External USB storage devices are not recommended. • The Device Share function can be activated even if your All-in-one PC is not powered-on. If you power on your All-in-one PC while using the Device Share function, an Input Select OSD menu will appear for display signal selection. All-in-one PC ET2700 Series 33