Asus EX-H110M-V Users Manual English - Page 12

Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector. • We recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard's high-definition audio capability. • If you want to connect a high-definition front panel audio module to this connector, set the Front Panel Type item in the BIOS setup to [HD Audio]. If you want to connect an AC'97 front panel audio module to this connector, set the item to [AC97]. By default, this connector is set to [HD Audio]. PCI Express 2.0 x1 slots This motherboard supports PCI Express x1 network cards, SCSI cards, and other cards that comply with the PCI Express specifications. PCI Express 3.0/2.0 x16 slots This motherboard has two PCI Express 3.0/2.0 x16 slots that support PCI Express 3.0/2.0 x16 graphic cards complying with the PCI Express specifications. VGA configuration Single VGA/PCIe card Dual VGA/PCIe card PCI Express operating mode PCIe 3.0/2.0 x16_1 (gray) PCIe 3.0/2.0 x16_2 (black) x16 (Recommended for single VGA card) N/A x16 x8 • In single VGA card mode, use the PCIe 3.0/2.0 x16_1 slot (gray) for a PCI Express x16 graphics card to get better performance. • We recommend that you provide sufficient power when using multiple graphics cards. See page 1-3 for details. • Connect a chassis fan to the motherboard connector labeled CHA_FAN1/2 when using multiple graphics cards for better thermal environment. IRQ assignments for this motherboard SATA Controller PCIEx16_1 Realtek 8111H LAN Controller High-Definition Audio XHCI Controller PCIEx1_1 PCIEx1_2 A shared shared - shared shared - - B - - - - - shared - C shared D - - shared - - - - 1-4 Chapter 1: Product introduction