Asus EX-H510M-V3 Users Manual English - Page 12

12. 10-1 pin System Panel header This header supports several chassis-mounted functions. • System power LED (2-pin +PWR_LED-) F_PANEL +PWR_LED- PWR_BTN PWR_LED+ PWR_LEDPWR GND This 2-pin header is for the system power LED. Connect the chassis power LED cable to this header. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode. PIN 1 HDD_LED+ HDD_LED- Ground HWRST# (NC) • Hard disk drive activity LED (2-pin +HDD_LED-) This 2-pin header is for the HDD Activity LED. Connect the HDD Activity LED cable to this header. The HDD LED lights up or flashes when data is read from or written to the HDD. +HDD_LED- RESET • Power button/Soft-off button (2-pin PWR_BTN) This header is for the system power button. • Reset button (2-pin RESET) This 2-pin header is for the chassis-mounted reset button for system reboot without turning off the system power. 1.2.2 Rear panel connectors 1 2 34 5 6 7 8 9 1. PS/2 mouse port (green). This port is for a PS/2 mouse. 2. Ethernet port. This port allows Gigabit connection to a Local Area Network (LAN) through a network hub. Refer to the table below for the Ethernet port LED indications. Ethernet port LED indications Activity/Link LED Status Description OFF No link ORANGE Linked BLINKING Data activity Speed LED Status Description OFF 10 Mbps connection ORANGE 100 Mbps connection GREEN 1 Gbps connection ACT/LINK LED SPEED LED Ethernet port 1-4 Chapter 1: Product Introduction