Asus F1A55-M LX3 PLUS R2.0 F1A55-M LX3 PLUS R2.0 User's Manual - Page 22

Memory configurations

Page 22 highlights

1.5.2 Memory configurations You may install 1GB, 2GB, 4GB, and 8GB unbuffered non-ECC DDR3 DIMMs into the DIMM sockets. • You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation. • Always install DIMMs with the same CAS latency. For optimal compatibility, we recommend that you install memory modules of the same version or date code (D/C) from the same vendor. Check with the retailer to get the correct memory modules. • Due to the memory address limitation on 32-bit Windows® OS, when you install 4GB or more memory on the motherboard, the actual usable memory for the OS can be about 3GB or less. For effective use of memory, we recommend that you do any of the following: - Install a maximum of 3GB system memory if you are using a 32-bit Windows® OS. - Use a 64-bit Windows® OS if you want to install 4GB or more memory on the motherboard. • This motherboard does not support DIMMs made up of 512Mb (64MB) chips or less. • The maximum 32GB memory capacity can be supported with 16GB or above DIMMs. ASUS will update the memory QVL once the DIMMs are available in the market. • The default memory operation frequency is dependent on its Serial Presence Detect (SPD), which is the standard way of accessing information from a memory module. Under the default state, some memory modules for overclocking may operate at a lower frequency than the vendor-marked value. To operate at the vendor-marked or at a higher frequency, refer to section 2.4 Ai Tweaker menu for manual memory frequency adjustment. • For system stability, use a more efficient memory cooling system to support a full memory load (2 DIMMs) or overclocking condition. F1A55-M LX3 R2.0 Series Motherboard Qualified Vendors Lists (QVL) DDR3-1066MHz capability Vendors Crucial Crucial ELPIDA ELPIDA KINGSTON KINGSTON KINGSTON Micron Micron Part No. CT12864BA1067.8FF CT25664BA1067.16FF EBJ10UE8EDF0-AE-F EBJ21UE8EDF0-AE-F KVR1066D3N7/1G KVR1066D3N7/2G KVR1066D3N7/4G MT8JTF12864AZ-1G1F1 MT16JTF25664AZ-1G1F1 Size SS/ DS 1GB SS 2GB DS 1GB SS 2GB DS 1GB SS 2GB DS 4GB DS 1GB SS 2GB DS Chip Brand Chip No. Micron Micron ELPIDA 9GF22D9KPT 9HF22D9KPT J1108EDSE-DJ-F ELPIDA ELPIDA ELPIDA Hynix Micron Micron J1108EDSE-DJ-F J1108BFSE-DJ-F J1108BDSE-DJ-F H5TQ2G83AFR 9GF22D9KPT 9HF22D9KPT Timing Voltage 7 - 7 - - 1.35V (low voltage) - 1.35V (low voltage) 7 1.5V 7 1.5V 7 1.5V 7 - 7 - DIMM socket support (Optional) A* B* • • • • • • • • • • • • • • • • • • 1-12 Chapter 1: Product introduction

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69

1.5.2
Memory configurations
You may install 1GB, 2GB, 4GB, and 8GB unbuffered non-ECC DDR3 DIMMs into the DIMM
sockets.
You may install varying memory sizes in Channel A and Channel B. The system maps
the total size of the lower-sized channel for the dual-channel configuration. Any excess
memory from the higher-sized channel is then mapped for single-channel operation.
Always install DIMMs with the same CAS latency. For optimal compatibility, we
recommend that you install memory modules of the same version or date code (D/C)
from the same vendor. Check with the retailer to get the correct memory modules.
Due to the memory address limitation on 32-bit Windows
®
OS, when you install 4GB
or more memory on the motherboard, the actual usable memory for the OS can be
about 3GB or less. For effective use of memory, we recommend that you do any of the
following:
-
Install a maximum of 3GB system memory if you are using a 32-bit Windows
®
OS.
-
Use a 64-bit Windows
®
OS if you want to install 4GB or more memory on the
motherboard.
This motherboard does not support DIMMs made up of 512Mb (64MB) chips or less.
The maximum 32GB memory capacity can be supported with 16GB or above DIMMs.
ASUS will update the memory QVL once the DIMMs are available in the market.
The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value. To operate at the vendor-marked
or at a higher frequency, refer to section
2.4 Ai Tweaker menu
for manual memory
frequency adjustment.
For system stability, use a more efficient memory cooling system to support a full
memory load (2 DIMMs) or overclocking condition.
Vendors
Part No.
Size
SS/
DS
Chip Brand
Chip No.
Timing Voltage
DIMM socket support
(Optional)
A*
B*
Crucial
CT12864BA1067.8FF
1GB
SS
Micron
9GF22D9KPT
7
-
Crucial
CT25664BA1067.16FF
2GB
DS
Micron
9HF22D9KPT
7
-
ELPIDA
EBJ10UE8EDF0-AE-F
1GB
SS
ELPIDA
J1108EDSE-DJ-F
-
1.35V
(low voltage)
ELPIDA
EBJ21UE8EDF0-AE-F
2GB
DS
ELPIDA
J1108EDSE-DJ-F
-
1.35V
(low voltage)
KINGSTON
KVR1066D3N7/1G
1GB
SS
ELPIDA
J1108BFSE-DJ-F
7
1.5V
KINGSTON
KVR1066D3N7/2G
2GB
DS
ELPIDA
J1108BDSE-DJ-F
7
1.5V
KINGSTON
KVR1066D3N7/4G
4GB
DS
Hynix
H5TQ2G83AFR
7
1.5V
Micron
MT8JTF12864AZ-1G1F1
1GB
SS
Micron
9GF22D9KPT
7
-
Micron
MT16JTF25664AZ-1G1F1
2GB
DS
Micron
9HF22D9KPT
7
-
F1A55-M LX3 R2.0 Series Motherboard Qualified Vendors Lists (QVL)
DDR3-1066MHz capability
Chapter 1: Product introduction
1-12