Asus F1A75-I DELUXE User Manual - Page 37
Serial ATA 6.0 Gb/s connectors 7-pin SATA6G 1~4, Digital audio connector 4-1 pin SPDIF_OUT
View all Asus F1A75-I DELUXE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
4. Serial ATA 6.0 Gb/s connectors (7-pin SATA6G 1~4) These connectors are for the Serial ATA 6.0 Gb/s signal cables for Serial ATA hard disk drives and optical disc drives. If you installed Serial ATA hard disk drives, you can create a RAID 0, RAID 1, or RAID 10 configuration through the onboard controller. SATA6G_3 SATA6G_1 GND RSATA_RXN3 RSATA_RXP3 RSATA_TXN3 RSATA_TXP3 GND GND GND RSATA_RXN1 RSATA_RXP1 RSATA_TXN1 RSATA_TXP1 GND GND F1A75-I DELUXE SATA6G_4 SATA6G_2 GND RSATA_TXP4 RSATA_TXN4 GND RSATA_RXP4 RSATA_RXN4 GND GND RSATA_TXP2 RSATA_TXN2 GND RSATA_RXP2 RSATA_RXN2 GND F1A75-I DELUXE SATA 6.0Gb/s connectors • These connectors are set to IDE mode by default. In IDE mode, you can connect Serial ATA boot/data hard disk drives to these connectors. If you intend to create a Serial ATA RAID set using these connectors, set the type of the SATA connectors in the BIOS to [RAID]. See section 2.5.2 SATA Configuration for details. • You must install Windows® XP Service Pack 3 or later version before using Serial ATA hard disk drives. The Serial ATA RAID feature is available only if you are using Windows® XP SP3 or later version. • When using hot-plug and NCQ, set the type of the SATA connectors in the BIOS to [AHCI]. See section 2.5.2 SATA Configuration for details. 5. Digital audio connector (4-1 pin SPDIF_OUT) This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. +5V SPDIFOUT GND F1A75-I DELUXE SPDIF_OUT F1A75-I DELUXE Digital audio connector Ensure that the audio device of Sound playback is Realtek High Definition Audio (the name may be different based on the OS). Go to Start > Control Panel > Sounds and Audio Devices > Sound Playback to configure the setting. The S/PDIF module is purchased separately. ASUS F1A75-I DELUXE 1-25