Asus H110M-F users manual English - Page 12

Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector. • We recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard's high-definition audio capability. • If you want to connect a high-definition front panel audio module to this connector, set the Front Panel Type item in the BIOS setup to [HD Audio]. If you want to connect an AC'97 front panel audio module to this connector, set the item to [AC97]. By default, this connector is set to [HD Audio]. PCI Express 2.0 x1 slots This motherboard has two PCI Express 2.0 x1 slots that support PCI Express x1 network cards, SCSI cards, and other cards that comply with the PCI Express specifications. PCI Express 3.0/2.0 x16 slot This motherboard supports one PCI Express 3.0/2.0 x16 graphic card that complies with the PCI Express specifications. IRQ assignments for this motherboard A B C D E F G H HD Audio controller shared - - - - - - - XHCI controller shared - - - - - - - SATA controller shared - - - - - - - Realtek LAN controller - - - shared - - - - PCIex16 shared - - - - - - - PCIex1_1 shared - - - - - - - PCIex1_2 - shared - - - - - - When using PCI cards on shared slots, ensure that the drivers support "Share IRQ" or that the cards do not need IRQ assignments. Otherwise, conflicts will arise between the two PCI groups, making the system unstable and the card inoperable. 1-4 Chapter 1: Product introduction