Asus H110S2/CSM User Guide - Page 12

Rear panel connectors 1 2 3 4 6 5 1. DC power connector. Insert the power adapter into this port. • It only supports 19V DC input. • DC socket type: 5.5/2.5mm. • The power adapter is purchased separately. • Use the appropriate DC power adapter for the following scenarios: - Use a 90W adapter when a 35W CPU is installed on the system. - Use a 120W adapter when using your system with an LVDS panel. - Use a high-rated adapter (above 90W) when a high-rated CPU (45W or higher CPU) is installed on the system. 2. HDMI port. This port is for a High-Definition Multimedia Interface (HDMI) connector, and is HDCP compliant allowing playback of HD DVD, Blu-Ray, and other protected content. 3. USB 2.0 port. This 4-pin Universal Serial Bus (USB) port is for USB 2.0/1.1 devices. 4. DisplayPort. This port is for DisplayPort-compatiable devices. 5. LAN (RJ-45) ports. These ports allow Gigabit connection to a Local Activity Link Speed Area Network (LAN) through a network hub. LED LED LAN port LED indications Activity/Link LED Status Off Orange Orange (Blinking) Orange (Blinking then steady) Description No link Linked Data activity Ready to wake up from S5 mode Speed LED Status OFF ORANGE GREEN _ LAN port Description 10Mbps connection 100Mbps connection 1Gbps connection _ 1-5 ASUS H110S2