Asus H610I-EM-A User Manual English

Asus H610I-EM-A Manual

Asus H610I-EM-A manual content summary:

  • Asus H610I-EM-A | User Manual English - Page 1
    H610I-EM-A Industrial Motherboard
  • Asus H610I-EM-A | User Manual English - Page 2
    written permission of ASUSTeK COMPUTER INC. ("ASUS"). Product warranty or service will not be extended if: (1) the product is repaired, modified the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
  • Asus H610I-EM-A | User Manual English - Page 3
    Contents Chapter 1 Product overview 1.1 Package contents 1-1 1.2 Features 1-1 1.3 Specifications 1-2 Chapter 2 Motherboard information 2.1 Before you proceed 2-1 2.2 Motherboard layout 2-2 2.3 Central Processing Unit (CPU 2-4 2.3.1 Installing the CPU 2-5 2.3.2 CPU heatsink and fan
  • Asus H610I-EM-A | User Manual English - Page 4
    3-12 3.3.17 IO Expander Configuration 3-12 3.3.18 Watchdog Timer 3-12 3.4 Hardware Monitor menu 3-12 3.5 Security menu 3-13 3.6 Boot menu 3-14 3.7 Exit menu 3-15 Appendix Notices...A-1 Service and Support A-5 iv
  • Asus H610I-EM-A | User Manual English - Page 5
    /2280 (SATA/PCIe x4 mode),1 x M.2 Socket 1 with Key E, type 2230 for WIFI/BT device (PCIe & CNVi) • Multi-display: 2 x HDMI™, 1 x DisplayPort, 1 x LVDS, 1 x Embedded DisplayPort (BOM option), supports up to 3 displays simultaneously Chapter 1: General information 1-1
  • Asus H610I-EM-A | User Manual English - Page 6
    Storage LAN Audio Rear I/O ports Internal I/O connectors LGA1700 socket for Intel® 12th Gen. Core™ i9/ i7/ i5/ i3, Pentium®, and Celeron® Processors Supports up to 65W Intel® H610 Chipset 2 x SO-DIMM, max.64GB, DDR4 3200/2933/2666/2400 MHz SDRAM Integrated graphics processor - Intel® HD Graphics
  • Asus H610I-EM-A | User Manual English - Page 7
    Internal I/O connectors Watch dog timer Power requirement Operation Temperature Non-Operation Temperature Relative Humidity OS support Certification Form Factor 1 x CPU Fan header (PWM mode) 1 x Chassis Fan header (PWM mode) 1 x LVDS/ eDP selection jumper 1 x Panel SW header 1 x Front Panel Audio
  • Asus H610I-EM-A | User Manual English - Page 8
    1-4 H610I-EM-A
  • Asus H610I-EM-A | User Manual English - Page 9
    Chapter 2 Motherboard information Chapter 2 Motherboard information 2.1 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. CAUTION! • Unplug the power cord from the wall socket before touching any component. •
  • Asus H610I-EM-A | User Manual English - Page 10
    2.2 Motherboard layout NOTE: Place nine screws into the holes indicated by circles to secure the motherboard to the chassis. CAUTION! Do not overtighten the screws! Doing so can damage the motherboard. 26 25 Place this side towards the rear of the chassis 24 23 22 COM2 COM1 LVDS_EDP 1 2 3
  • Asus H610I-EM-A | User Manual English - Page 11
    Connectors/Jumpers/Slots 1. COM RING/+5V/+12V selection jumper (COM1/2_SEL) 2. LCD Panel monitor switch header (2-pin PANEL_SW) 3. LVDS Backlight Panel header (5-pin LCD_BLKT_PANEL) 4. ATX Power connector (24-pin ATXPWR, 2 x 4-pin EATX12V) 5. Intel® LGA1700 CPU socket 6. Chassis Intrusion header
  • Asus H610I-EM-A | User Manual English - Page 12
    2.3 Central Processing Unit (CPU) The motherboard comes with a surface mount LGA1700 socket designed for the Intel® 12th Gen. Core™ i9 / Core™ i7 / Core™ i5 / Core™ i3, Pentium®, and Celeron® Processors. LGA1700 IMPORTANT: Unplug all power cables before installing the CPU. CAUTION! • Ensure that you
  • Asus H610I-EM-A | User Manual English - Page 13
    2.3.1 Installing the CPU • Ensure that you install the correct CPU designed for LGA1700 socket only. DO NOT install a CPU designed for LGA1155, LGA1156, LGA1151, and LGA1200 sockets on the LGA1700 socket. • ASUS will not cover damages resulting from incorrect CPU installation/ removal, incorrect
  • Asus H610I-EM-A | User Manual English - Page 14
    2 3 A B 4 5 B A 2-6 H610I-EM-A
  • Asus H610I-EM-A | User Manual English - Page 15
    2.3.2 CPU heatsink and fan assembly installation CAUTION! Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary. To install the CPU heatsink and fan assembly 1 A B B 2 A 3 Chapter 2: Motherboard information 2-7
  • Asus H610I-EM-A | User Manual English - Page 16
    4 • We recommend using a LGA1700 compatible cooling system on an Intel® 600 series motherboard. • Push-pin type LGA1200 compatible cooling systems cannot be installed to this motherboard. LGA1700 To uninstall the CPU heatsink and fan assembly 1 2 B A B A 2-8 H610I-EM-A
  • Asus H610I-EM-A | User Manual English - Page 17
    2.4 System memory This motherboard comes with two Double Data Rate 4 (DDR4) Small Outline Dual Inline Memory Module (SO-DIMM) sockets. The figure below illustrates the location of the DDR4 SO-DIMM sockets: SO-DIMM_B1 SO-DIMM_A1 Channel Channel B Channel A Sockets SO-DIMM_B1 SO-DIMM_A1 IMPORTANT!
  • Asus H610I-EM-A | User Manual English - Page 18
    Recommended memory configuration DIMM_A1 DIMM_B1 DIMM_B1 DIMM_A1 Installing a DIMM 1 To remove a DIMM B A 2 B A A B 2-10 H610I-EM-A
  • Asus H610I-EM-A | User Manual English - Page 19
    +3V_BAT GND 2.5 Jumpers 1. Clear RTC RAM (2-pin CLRTC) This header allows you to clear the CMOS RTC RAM data of the system setup information such as date, time, and system passwords. CLRTC PIN 1 Connector type HEADER 1x2p, 2.54mm pitch, S/T To erase the RTC RAM: 1. Turn OFF the computer and unplug
  • Asus H610I-EM-A | User Manual English - Page 20
    2. COM Ring/+5V/+12V selection jumper (6-pin COM1/2_SEL) A A COM2_SEL B B COM1_SEL 21 43 65 +12V +5V RI (Default) Setting Pins +12V 1-2 +5V 3-4 Ring (Default) 5-6 3. AT/ATX mode selection jumper (3-pin AT_ATX_SEL) AT_ATX_SEL 12 23 ATX mode (Default) AT mode Pins 1-2 (
  • Asus H610I-EM-A | User Manual English - Page 21
    4. LVDS Panel Backlight Enable Signal Selection jumper (BKLTEN_SEL) BKLTEN_SEL 12 23 High Active (Default) Low Active BKLTEN_SEL Pins HIGH active 1-2 LOW active 2-3 Connector type HEADER 1x3p, 2.54mm pitch, S/T 5. LVDS Panel VCC Power Selection jumper (6-pin VCC_PWR_SEL) VCC_PWR_SEL 4
  • Asus H610I-EM-A | User Manual English - Page 22
    2.6 Connectors 2.6.1 Rear panel connectors 1 2 3 6 1 4 5 7 1. COM ports (COM, RS232/RS422/RS485). These ports connect modems, or other devices that conform with serial specification. 2. DisplayPort. This port is for a DisplayPort-compatible device. 3. LAN (RJ-45) ports. These ports allow
  • Asus H610I-EM-A | User Manual English - Page 23
    Out Bass/Center Bass/Center - Side Speaker Out NOTE: To configure a 7.1-channel audio output: Use a chassis with HD audio module in the front panel to support a 7.1-channel audio output. Chapter 2: Motherboard information 2-15
  • Asus H610I-EM-A | User Manual English - Page 24
    2.6.2 Internal connectors 1. ATX Power connectors (24-pin ATXPWR, 2 x 4-pin EATX12V) Correctly orient the ATX power supply plugs into these connectors and push down firmly until the connectors completely fit. A B A EATX12V EATXPWR GND GND GND GND PIN 1 B +12V +12V +12V +12V +3 Volts +12
  • Asus H610I-EM-A | User Manual English - Page 25
    pin USB56, USB78, USB9) These headers are for USB 2.0 ports. Connect a USB cable to the header. The USB headers comply with USB 2.0 specification that supports up to 480 Mbps connection speed. A USB_78 PIN 10 NC GND USB_P7+ USB_P7USB+5V GND USB_P8+ USB_P8USB+5V PIN 2 PIN 1 C USB9 PIN 1 USB+5V
  • Asus H610I-EM-A | User Manual English - Page 26
    to install an M.2 SSD module. M.2(SOCKET3) Connector type NGFF KEY-M 67P, 8.5H NOTES: • The M.2 SSD module is purchased separately. • This slot supports M Key and 2242/2260/2280 storage devices. 6. M.2 Wi-Fi slot This slot connects to an M.2 Wi-Fi device. +3VSB_WIFI +3VSB_WIFI NC M.2_BT_PCMCLK
  • Asus H610I-EM-A | User Manual English - Page 27
    7. System Panel header (10-1 pin F_PANEL) This header supports several chassis-mounted functions. +PWR_LED- PWR_BTN PLED+ PLEDPWRBTN#_PANEL GND PIN 2 F_PANEL PIN 1 PIN 9 HDD_LED+ HDD_LED- GND O_RSTCON#_PR NC +HDD_LED- RESET Connector type HEADER
  • Asus H610I-EM-A | User Manual English - Page 28
    8. Speaker header (4-pin SPEAKER) The 4-pin header is for the chassis-mounted system warning speaker. The speaker allows you to hear system beeps and warnings. SPEAKER PIN 1 +5V GND GND Speaker Out Connector type HEADER 1x4p, 2.54mm pitch, S/T 9. Chassis Intrusion header (4-1 pin_CHASSIS) This
  • Asus H610I-EM-A | User Manual English - Page 29
    10. SATA 6.0Gb/s ports (7-pin SATA6G_1-2) These ports connect to SATA 6.0 Gb/s hard disk drives or an optical drive via SATA 6.0 Gb/s signal cables. A SATA6G_2 B SATA6G_1 GND RSATA_RXP RSATA_RXN A GND B RSATA_TXN RSATA_TXP GND Connector type SATA CON 7P S/T 11. General Purpose Input/
  • Asus H610I-EM-A | User Manual English - Page 30
    12. COM Port headers (10-pin COM3 - COM6) These headers are for serial (COM) ports. Connect the serial port cables to these headers, then install the module to a slot opening at the back of the system chassis. ABC D A COM3 B COM4 C COM5 D COM6 RXD DTR# DSR# CTS# Ring RTS# GND TXD DCD# PIN 9
  • Asus H610I-EM-A | User Manual English - Page 31
    14. Front Panel Audio header (10-1 pin AAFP) This header is for a chassis-mounted front panel audio I/O module that supports HD Audio standard. Connect one end of the front panel audio I/O module cable to this header. A_GND NC A_JD_FMIC1 A_JD_HPOUT PIN 2 AAFP PIN 1 PIN 10
  • Asus H610I-EM-A | User Manual English - Page 32
    15. COM Debug header (5-1 pin COM_DEBUG) This header allows connection to a COM Debug card. COM_DEBUG PIN 6 Debug_Control GND GND PIN 2 PIN 5 +3V O_COMDBG_P80 PIN 1 Connector type HEADER 2x3p, K3, 2.54 mm pitch, S/T NOTE: The COM Debug Card is purchased separately. 16. LCD Panel monitor switch
  • Asus H610I-EM-A | User Manual English - Page 33
    17. LVDS Backlight Panel header (5-pin LCD_BLKT_PANEL) This header is for the LCD panel brightness controls. LCD_BLKT_PANEL LVDS Signal eDP Signal PIN1 PIN1 +12V GND LCD_ENABKLT_CN H_LCD_BL_PWM_SW +5V +12V GND LCD_ENABKLT_CN NC +5V Connector type WAFER 6p, 2.0mm pitch 18. LVDS/EDP header (40
  • Asus H610I-EM-A | User Manual English - Page 34
    19. PCIe 4.0 x16 slot (PCIEX16(G4)) This slot supports a PCIe 4.0 x16 graphics card that complies with the PCI Express specification. PCIEX16(G4) 2-26 H610I-EM-A
  • Asus H610I-EM-A | User Manual English - Page 35
    . 3.1 BIOS setup program Use the BIOS Setup program to configure its parameters. The BIOS screens include navigation keys and brief online help to guide you in using the BIOS Setup program. Entering BIOS Setup at startup To enter BIOS Setup at startup: Press or during the Power-
  • Asus H610I-EM-A | User Manual English - Page 36
    3.1.1 BIOS menu screen Menu bar The menu bar on top of the screen has the following main items: Main Advanced Hardware Monitor Security Boot Exit For changing the basic system configuration For changing the advanced system settings For displaying the system temperature and changing the fan
  • Asus H610I-EM-A | User Manual English - Page 37
    3.3 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Be cautious when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. 3.3.1 LVDS Configuration The items in this menu show the
  • Asus H610I-EM-A | User Manual English - Page 38
    item allows you to select the TPM device. Configuration options: [dTPM] [PTT] 3.3.3 Trusted Computing Security Device Support This item allows you to enable or disable BIOS support for security devices. Configuration options: [Disable] [Enable] 3.3.4 CPU Configuration The items in this menu show CPU
  • Asus H610I-EM-A | User Manual English - Page 39
    options: [Disabled] [Enabled] Intel(R) Speed Shift Technology This item allows you to enable or disable Intel(R) Speed Shift Technology support. When enabled, CPPC v2 interface allows hardware controlled P-state. Configuration options: [Disabled] [Enabled] Turbo Mode This item allows you
  • Asus H610I-EM-A | User Manual English - Page 40
    RC6 (Render Standby) Allows you to enable or disable render standby support. Configuration options: [Disabled] [Enabled] 3.3.6 Power Management Enable ACPI Auto Configuration Allow you to enable/disable the ACPI Auto configuration. Configuration options: [Disabled] [Enabled] Enable Hibernation
  • Asus H610I-EM-A | User Manual English - Page 41
    3.3.8 Super IO Configuration Super IO Chip NCT6126D Serial Port 1 Configuration Serial Port Allows you to enable or disable the serial port (COM).Configuration options: [Disabled] [Enabled] The following items appear only when you set Serial Port to [Enabled]. COM1 Control Allows you to select the
  • Asus H610I-EM-A | User Manual English - Page 42
    same or compatible settings. Terminal Type Configuration options: [VT100] [VT100Plus] [VT-UTF8] [ANSI] [VT100] ASCII char set. [VT100Plus] Extends VT100 to support color, function keys, etc. [VT-UTF8] Uses UTF8 encoding to map Unicode chars onto 1 or more bytes. [ANSI] Extended ASCII char
  • Asus H610I-EM-A | User Manual English - Page 43
    two wires to send start/stop signals. Configuration options: [None] [Hardware RTS/CTS] VT-UTF8 Combo Key Support Allows you to enable or disable VT-UTF8 Combination Key Support for ANSI/ VT100 terminals. Configuration options: [Disabled] [Enabled] Recorder Mode With this mode enabled only text will
  • Asus H610I-EM-A | User Manual English - Page 44
    Enabled] The following two items appear only when you set the previous item to [Enabled]. Ipv4 PXE Support This item allows user to disable or enable the Ipv4 PXE Boot support. Configuration options: [Disabled] [Enabled] Ipv6 PXE Support This item allows user to disable or enable the Ipv6 PXE Boot
  • Asus H610I-EM-A | User Manual English - Page 45
    LAN2 RTL8111H [Enabled] Enables the Intel LAN2 controller. [Disabled] Disables the controller. M.2 WiFi Allow you to enable or disable M.2 WiFi function. Configuration options: [Enabled] [Disabled] M.2 BT Allow you to enable or disable M.2 BT function. Configuration options: [Enabled] [Disabled]
  • Asus H610I-EM-A | User Manual English - Page 46
    of this GPIO. Configuration options: [Low] [High] 3.3.18 Watchdog Timer Watchdog Support This item allows you to enable or disable Watchdog timer. Configuration options: [Enabled . Configuration options: [Disabled] [Normal] [Manual Mode] The following item appears only when you set Smart Fan Mode to
  • Asus H610I-EM-A | User Manual English - Page 47
    Smart Fan Function System Fan Setting Chassis Fan Temperature 1(~4) Allows you to set the value of temperature1(~4). Chassis Fan FD/RPM 1(~4) Allows you to set the value of Fan Duty/PRM 1(~4) when temperature is T1(~4). CPU Fan Setting CPU Fan Temperature 1(~4) Allows you to set the value of
  • Asus H610I-EM-A | User Manual English - Page 48
    To set a user password: 1. Select the User Password item and press . 2. From the Create New Password box, key in a password, then press . 3. Confirm the password when prompted. To change a user password: 1. Select the User Password item and press . 2. From the Enter Current
  • Asus H610I-EM-A | User Manual English - Page 49
    Boot up NumLock State [On] Set the power-on state of the NumLock to [On]. [Off] Set the power-on state of the NumLock to [Off]. Quiet Boot Allows you to enable or disable the Quiet Boot option.Configuration options: [Disabled] [Enabled] Fast Boot [Enabled] Select to accelerate the boot speed.
  • Asus H610I-EM-A | User Manual English - Page 50
    Restore Defaults Restore/load default values for all the setup options. Save as User Defaults This option allows you to save the changes you have made so far as user defaults. Restore User Defaults Restore the user defaults with all the setup options. 3-16 H610I-EM-A
  • Asus H610I-EM-A | User Manual English - Page 51
    installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation
  • Asus H610I-EM-A | User Manual English - Page 52
    Compliance Statement of Innovation, Science and Economic Development Canada (ISED) This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2)
  • Asus H610I-EM-A | User Manual English - Page 53
    . This symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste. ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions
  • Asus H610I-EM-A | User Manual English - Page 54
    the essential requirements and other relevant provisions of related Directives. Full text of EU declaration of conformity is available at: www.asus.com/support Français AsusTek Computer Inc. déclare par la présente que cet appareil est conforme aux critères essentiels et autres clauses pertinentes
  • Asus H610I-EM-A | User Manual English - Page 55
    Service and Support Visit our multi-language website at https://www.asus.com/support/ Appendix A-5
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55

Industrial Motherboard
H610I-EM-A