Asus H61M-D H61M-D User's Manual - Page 23
CPU and chassis fan connectors 4-pin CPU_FAN, 4-pin CHA_FAN, USB 2.0 connectors 10-1 pin USB56, USB78 - motherboard specification
View all Asus H61M-D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
5. CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector. CPU_FAN CPU FAN PWM CPU FAN IN +12V GND H61M-D CHA_FAN CHA FAN PWM CHA FAN IN +12V GND H61M-D Fan connectors Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors! The CPU_FAN connector supports a CPU fan of maximum 1A (12 W) fan power. Only the 4-pin CPU fan supports the ASUS Fan Xpert feature. 6. USB 2.0 connectors (10-1 pin USB56, USB78, USB910) These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specifications and supports up to 480Mbps connection speed. USB56 USB78 USB910 USB+5V USB_P5USB_P5+ GND NC USB+5V USB_P7USB_P7+ GND NC USB+5V USB_P9USB_P9+ GND NC H61M-D PIN 1 PIN 1 PIN 1 USB+5V USB_P6USB_P6+ GND USB+5V USB_P8USB_P8+ GND USB+5V USB_P10USB_P10+ GND H61M-D USB2.0 connectors Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! The USB 2.0 module is purchased separately. 1-16 Chapter 1: Product introduction