Asus H61M-G User Guide - Page 20
PS/2 and USB device wake-up PS/2_USBPW1~4, USB device wake-up USBPW5~8, H61M-G
View all Asus H61M-G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
2. PS/2 and USB device wake-up (PS/2_USBPW1~4) Set this jumper to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected PS/2 or USB devices. Set to +5VSB to wake up from S3 and S4 sleep modes (no power to CPU, DRAM in slow refresh, power supply in reduced power mode). PS/2_USBPW1-4 12 23 H61M-G +5V +5VSB (Default) H61M-G PS/2 and USB Device Wake-up • The USB device wake-up feature requires a power supply that can provide 500mA on the +5VSB lead for each USB port; otherwise, the system would not power up. • The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal condition or in sleep mode. 3. USB device wake-up (USBPW5~8) This jumper allows you to enable or disable the USB device wake-up feature. When you set this jumper to pins 2-3 (+5VSB), you can wake up the computer by pressing a key on the USB keyboard or by clicking on the USB mouse. This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS. H61M-G USBPW5-8 12 23 +5V +5VSB (Default) H61M-G USB Device Wake-up 1-12 E8188_H61M_G_manual.indb 12 Chapter 1: Product introduction 2/12/14 2:57:16 PM