Asus H81M-PLUS H81M-PLUS User's Manual - Page 24
CPU and chassis fan connectors 4-pin CPU_FAN, 4-pin CHA_FAN, Intel
View all Asus H81M-PLUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
5. Intel® H81 Serial ATA 3.0Gb/s connector (7-pin SATA3G_1~2) This connector connects to Serial ATA 3.0 Gb/s hard disk drives via Serial ATA 3.0 Gb/s signal cables. H81M-PLUS SATA3G_1 SATA3G_2 GND RSATA_TXP1 RSATA_TXN1 GND RSATA_RXN1 RSATA_RXP1 GND GND RSATA_TXP2 RSATA_TXN2 GND RSATA_RXN2 RSATA_RXP2 GND H81M-PLUS SATA 3.0Gb/s connectors When using hot-plug and NCQ, set the SATA Mode Selection item in the BIOS to [AHCI]. 6. CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector. CPU_FAN CPU FAN PWM CPU FAN IN CPU FAN PWR GND GND CHA FAN PWR CHA FAN IN VCC H81M-PLUS CHA_FAN H81M-PLUS Fan connectors Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors! The CPU_FAN connector supports a CPU fan of maximum 1A (12 W) fan power. Only the 4-pin CPU fan support the ASUS Fan Xpert feature. 1-16 Chapter 1: Product introduction