Asus K7V-RM K7V-RM User Manual - Page 19
H/w Setup
View all Asus K7V-RM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
3. HARDWARE SETUP 3) 3.3V Power Source Setting (JP3-JP10) (Requires optional components.) This jumper lets you select the onboard 3.3V from the motherboard if your ATX power supply does not have a 3.3V lead and 3.3V optional components are mounted on the motherboard. This motherboard normally does not have the 3.3V components and therefore requires a standard ATX power supply with its own 3.3V lead. Setting JP3-JP10 3.3V from PWR [1-2] (default) 3.3V from MB [0-0] JP3001 JP3-JP10 3. H/W SETUP Motherboard Settings 01 01 01 01 01 01 ® K7V-RM JP3008 3.3V from Power Supply (Default) 3.3V from Motherboard K7V-RM 3.3V Power Source Setting 4) Onboard Audio Setting (available on audio model only) The onboard audio CODEC may be enabled or disabled using all of these jumpers. Disable the onboard audio CODEC if you are using an PCI audio card on any of the expansion slots or a primary AMR on the AMR slot (see AMR Slot later in this section). If using an PCI audio expansion card, Onboard AC'97 Audio Controller in 4.4.5 Peripheral Setup must also be disabled. Setting Enable Disable AUDIO CODEC [1-2] [1-2] [1-2] [1-2] (default) [2-3] [2-3] [2-3] [2-3] Enable Onboard Audio Codec (Default) Disable Onboard Audio Codec SPK ADN# AUD_EN2 AUD_EN1 SPK ADN# AUD_EN2 AUD_EN1 ® K7V-RM 3 3 2 2 1 1 K7V-RM Audio Codec Setting ASUS K7V-RM User's Manual 19