Asus K8V Deluxe K8V Deluxe User Manual - Page 54
Hardware information, ATX power connectors, pin ATXPWR, 4-pin ATX12V
View all Asus K8V Deluxe manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
7. ATX power connectors (20-pin ATXPWR, 4-pin ATX12V) These connectors connect to an ATX 12V power supply. The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. In addition to the 20-pin ATXPWR1 connector, this motherboard requires that you connect the 4-pin ATX +12V power plug to provide sufficient power to the CPU. • Do not forget to connect the 4-pin ATX +12V power plug. Otherwise, the system does not boot up. • Make sure that your ATX 12V power supply can provide 12A on the +12V lead and at least 1A on the +5-volt standby lead (+5VSB). The minimum recommended wattage is 300W, or 350W for a fully configured system. The system may become unstable or may not boot up if the power is inadequate. ATXPWR ATX12V K8V ® Pin 1 +12.0VDC +5VSB PWR_OK COM +5.0VDC COM +5.0VDC COM +3.3VDC +3.3VDC +5.0VDC +12V DC +5.0VDC -5.0VDC GND COM COM COM PS_ON# COM -12.0VDC +3.3VDC +12V DC GND K8V ATX Power Connectors 2-28 Chapter 2: Hardware information