Asus K8V-X K8V-X user's manual - Page 60
JumperFree Configuration
View all Asus K8V-X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
IRQ xx [Available] When set to [Available], the specific IRQ is free for use of PCI/PnP devices. When set to [Reserved], the IRQ is reserved for legacy ISA devices. Configuration options: [Available] [Reserved] 2.4.5 JumperFree Configuration Configure System Frequency/Voltage CPU FSB Frequency CPU Speed/Voltage Setting DDR Voltage AGP Voltage V-Link Voltage Performance Mode [200 MHz] [Auto] [Auto] [1.5V] [2.5V] [Auto] CPU FSB Frequency [200MHz] Allows you to adjust the CPU FSB operating frequency. Configuration options: [200MHz] [201 MHz] ~ [300MHz] CPU Speed/Voltage Setting [Auto] Allows you to set the CPU speed and voltage setting. Configuration options: [Auto] [Manual] CPU Speed [800 MHz] Allows you to manuallyset the CPU speed. The configuration options vary depending on the speed of the processor installed. This item appears only when the CPU Speed/Voltage Setting item is set to Manual. CPU Voltage [1.450 V] Allows you to manually set the CPU voltage. The configuration options vary depending on the speed of the processor installed. This item appears only when the CPU Speed/Voltage Setting item is set to Manual. Setting a low CPU voltage can cause system boot failure! DDR Voltage [Auto] Allows you to automatically detect or select from a list the DDR operating voltage. Configuration options: [Auto] [2.6V] [2.7V] [2.8V] AGP Voltage [1.5V] Adjusts the AGP voltage setting. Configuration options: [1.5V] [1.7V] 2-24 Chapter 2: BIOS Setup