Asus KFN32-D User Guide - Page 115
LSI Logic MPT Setup Utility - sli sas bios
UPC - 610839141661
View all Asus KFN32-D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
5.3 LSI Logic MPT Setup Utility (For KFN32-D SLI/SAS only) The LSI Logic MPT Setup Utility is an integrated RAID solution that allows you to create the following RAID set(s) from SAS hard disk drives supported by the LSI1068 PCI-X SAS controller: • RAID 1 (Integrated Mirroring) • RAID 1E (Integrated Mirroring Enhanced) • RAID 0 (Integrated Stripping) 5.3.1 Integrated Mirroring Overview The Integrated Mirroring (IM) feature supports simultaneous mirrored volumes with two disks (IM). Integrated Mirroring Enhanced (IME) supports three to eight disks, or seven mirrored disks plus a hot spare disk. The IM feature supports hot swap capability. When a disk in an IM volume fails, you can easily restore the volume, and the swapped disk is automatically re-mirrored. Creating Integrated Mirroring Volumes • You may use disks of different sizes in IM and IME volumes; however, the size of the smallest disk determines the "logical" size of each member disk. • Do not combine Serial ATA and SAS disks in one volume. • The RAID and BIOS setup screens shown in these sections are for reference only and may not exactly match the items on your screen. To create an IM volume 1. Turn on the system after installing all SAS hard disk drives. 2. During POST, press to enter the SAS configuration utility. LSI Logic Corp MPT SAS BIOS MPTBIOS-6.05.06.00 (2005.01.16) Copyright 2000-2005 LSI Logic Corp *** RELEASE VERSION *** Press Ctrl+C to start LSI Logic Configuration Utility... ASUS KFN32-D SLI Series 5-11