Asus KFSN4-DRE iKVM IST User Guide - Page 98
Creating a RAID Volume
View all Asus KFSN4-DRE iKVM IST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
5.2.2 Creating a RAID Volume To create a RAID 0 set: 1. From the Define a New Array menu, select RAID Mode, then press . A pop-up menu appears.Use the up or down arrow keys to select a RAID mode , then press . You can select either Mirroring, Striping, Spanning, Stripe Mirroring, or RAID 5. Mirroring Striping Stripe Mirroring Spanning RAID 5 • The RAID mode is set to Mirroring by default. • Not all RAID modes are supported on all platforms. (This server only has two HDDs that only supports RAID 0 and RAID 1 mode.) 2. Press to select the Striping Block option, then press . The following submenu appears:The available stripe size values range from 4KB to 128KB. The default stripe size is optimal (64KB). You must choose the stripe size value based on the projected drive usage. For low disk usage, select 4 KB/16 KB. For typical disk usage, select 64 KB. Select 128KB for performance disk usage. 4K ↑ 8K 16K 32K 64K 128K Optim ↓ For server systems, we recommend using a lower array block size. For multimedia computer systems used mainly for audio and video editing, we recommend a higher array block size for optimum performance. 3. Press to move to the Free Disks section. Highlight the hard disk drives that you want to add in the RAID set, then press the right arrow key to select. The selected hard disk drives appear in the Array Disks section. Repeat the process until all desired hard disk drives are added. 5-4 Chapter 5: RAID configuration