Asus M2A VM Motherboard Installation Guide - Page 67

UMA Frame Buffer Size [64MB] Configuration options: [32MB] [64MB] [128MB] [256MB] Surroundview [Disabled] Allows you to disable or enable the surroundview function. Configuration options: [Disabled] [Enabled] This item becomes user-configurable when you install an ATI graphics card into the PCI Express x16 slot. Spread Spectrum [Auto] Allows you to disable or set to Auto the clock generator spread spectrum. Configuration options: [Disabled] [Auto] 2.4.3 PCIPnP Advanced Phoenix-Award BIOS CMOS Setup Utility PCIPnP Plug & Play O/S [No] Resources Controlled By x IRQ Resources PCI Latency Timer(CLK) [Auto] [64] ** PCI Express relative items ** Maximum Payload Size [4096] Select Menu Item Specific Help Select Yes if you are using a Plug and Play capable operating system Select No if you need the BIOS to configure non-boot devices Plug & Play O/S [No] When set to [No], the BIOS configures all the devices in the system. When set to [Yes] and if you install a Plug and Play operating system, the operating system configures the Plug and Play devices not required for boot. Configuration options: [No] [Yes] Resources Controlled By [Auto] When set to [Auto], the BIOS automatically configures all the boot and Plug and Play compatible devices. Set to [Manual] if you want to assign the IRQ DMA and memory base address fields. Configuration options: [Auto] [Manual] When the item Resources Controlled By is set to [Auto], the item IRQ Resources is grayed out and not user-configurable. Refer to the section "IRQ Resources" for information on how to enable this item. ASUS M2A-VM 2-23