Asus M2N Plus Motherboard Installation Guide - Page 45
USB device wake-up 3-pin USBPW12, USBPW34, Keyboard power 3-pin KBPWR, M2N-PLUS SLI USB device wake-up - sli bios
UPC - 610839149452
View all Asus M2N Plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
2. USB device wake-up (3-pin USBPW12, USBPW34, USBPW56, USBPW78) Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices. Set to +5VSB to wake up from S3 and S4 sleep modes (no power to CPU, DRAM in slow refresh, power supply in reduced power mode). M2N-PLUS SLI ® USBPW12 2 1 +5V (Default) 3 2 +5VSB USBPW34 12 23 +5V +5VSB (Default) USBPW56 USBPW78 12 23 M2N-PLUS SLI USB device wake-up +5V (Default) +5VSB • The USB device wake-up feature requires a power supply that can provide 500mA on the +5VSB lead for each USB port; otherwise, the system would not power up. • The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal condition or in sleep mode. 3. Keyboard power (3-pin KBPWR) This jumper allows you to enable or disable the keyboard wake-up feature. Set this jumper to pins 2-3 (+5VSB) if you wish to wake up the computer when you press a key on the keyboard (the default value is [Disabled]). This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS. See section 4.5.3 APM Configuration. M2N-PLUS SLI ® KBPWR 12 23 +5V (Default) +5VSB M2N-PLUS SLI Keyboard power setting ASUS M2N-Plus SLI Vista Edition 2-21