Asus M2N-SLI DELUXE M2N-SLI Deluxe English Edition User's Manual - Page 54
Front panel audio connector 10-1 pin AAFP - motherboard bios
View all Asus M2N-SLI DELUXE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
• For a fully configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum power of 600 W. • Do not forget to connect the 4-pin ATX +12 V power plug; otherwise, the system will not boot. • Use of a PSU with a higher power output is recommended when configuring a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate. 10. Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector. AAFP Azalia-compliant pin definition AC '97-compliant pin definition GND PRESENCE# SENSE1_RETUR SENSE2_RETUR AGND NC NC NC MIC2_L MICPWR Line out_R NC Line out_L PORT1 L PORT1 R PORT2 R SENSE_SEND PORT2 L M2N-SLI DELUXE R M2N-SLI DELUXE Azalia Front Panel Audio Connector • We recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard's high-definition audio capability. • By default, this connector is set to AC97 Audio. If you want to connect a High Definition front panel audio module to this connector, set the Front Panel Support Type item in the BIOS to [HD Audio]. See section "4.4.7 Onboard Device Configuration" for details.. 2-30 Chapter 2: Hardware information