Asus M2N-VM DVI User Manual - Page 42
CPU and Chassis Fan connectors 4-pin CPU_FAN, 3-pin CHA_FAN, Digital audio connector 4-1 pin - port
View all Asus M2N-VM DVI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
5. CPU and Chassis Fan connectors (4-pin CPU_FAN, 3-pin CHA_FAN) The fan connectors support cooling fans of 350mA~740mA (8.88W max.) or a total of 1A~2.22A (26.64W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector. Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors. Only CPU Fan supports Q-Fan. Rotation +12V GND CPU FAN PWM CPU FAN IN CPU FAN PWR GND R M2N-CM DVI CPU_FAN CHA_FAN M2N-CM DVI FAN Connectors 6. Digital audio connector (4-1 pin SPDIF_OUT) This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port(s). Connect the S/PDIF module cable to this connector, then install the module to a slot opening at the back of the system chassis. GND SPDIFOUT +5V R M2N-CM DVI SPDIF_OUT M2N-CM DVI Digital Audio Connector The S/PDIF module is purchased separately. 1-30 Chapter 1: Product introduction