Asus M2N-VM SE HDMI User Manual - Page 78

IRQ-xx assigned to [PCI Device] When set to [PCI Device], the specific IRQ is free for use of PCI/PnP devices. When set to [Reserved], the IRQ is reserved for legacy ISA devices. Configuration options: [PCI Device] [Reserved] 2.4.6 USB Configuration The items in this menu allows you to change the USB-related features. Select an item then press to display the configuration options. USB Configuration Module Version - 2.24.1-13.4 USB Devices Enabled: 1 Drive USB 1.1 Controller USB 2.0 Controller Legacy USB Support USB 2.0 Controller Mode BIOS EHCI Hand-Off [Enabled] [Enabled] [Auto] [HiSpeed] [Enabled] USB Mass Storage Device Configuration Options Enable Disable The Module Version and USB Devices Enabled items show the auto-detected values. If no USB device is detected, the item shows None. USB 1.1 Controller [Enabled] Enables or disables the USB 1.1 Controller. Configuration options: [Disabled] [Enabled] USB 2.0 Controller [Enabled] Enables or disables the USB 2.0 Controller. Configuration options: [Disabled] [Enabled] Legacy USB Support [Enabled] Allows you to enable or disable support for Legacy USB storage devices, including USB flash drives and USB hard drives. Setting to Auto allows the system to detect the presence of USB devices at startup. If detected, the USB controller legacy mode is enabled. If no USB device is detected, the legacy USB support is disabled. Configuration options: [Disabled] [Enabled] [Auto] 2-30 Chapter 2: BIOS setup