Asus M2S-X M2S-X user's manual - Page 49

Recovering the BIOS from the USB flash disk

Get Asus M2S-X PDF manuals and user guides View all Asus M2S-X manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

When found, the utility reads the BIOS file and starts flashing the corrupted BIOS file. Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Floppy not found! Checking for CD-ROM... CD-ROM found! Reading file "M2S-X.ROM". Completed. Start flashing... 4. Restart the system after the utility completes the updating process. Recovering the BIOS from the USB flash disk To recover the BIOS from the USB flash disk: 1. Insert the USB flash disk that contains BIOS file to the USB port. 2. Turn on the system. 3. The utility will automatically checks the devices for the BIOS file When found, the utility reads the BIOS file and starts flashing the corrupted BIOS file. 4. Restart the system after the utility completes the updating process. • Use only a USB flash disk smaller than 8GB with single partition and FAT 32/16/12 format. • DO NOT shut down or reset the system while updating the BIOS! Doing so can cause system boot failure! ASUS M2S-X 2-

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
ASUS M2S-X
2-7
When found, the utility reads the BIOS file and starts flashing the
corrupted BIOS file.
Recovering the BIOS from the USB flash disk
To recover the BIOS from the USB flash disk:
1.
Insert the USB flash disk that contains BIOS file to the USB port.
2.
Turn on the system.
3.
The utility will automatically checks the devices for the BIOS file When
found, the utility reads the BIOS file and starts flashing the corrupted
BIOS file.
4.
Restart the system after the utility completes the updating process.
Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...
Floppy not found!
Checking for CD-ROM...
CD-ROM found!
Reading file “M2S-X.ROM”. Completed.
Start flashing...
•
Use only a USB flash disk smaller than 8GB with single partition and
FAT 32/16/12 format.
•
DO NOT shut down or reset the system while updating the BIOS!
Doing so can cause system boot failure!
4.
Restart the system after the utility completes the updating process.