Asus M3A32-MVP DLX User Manual - Page 60
ATX power connectors 24-pin EATXPWR; 8-pin ATX12V, Chassis intrusion connector 4-1 pin CHASSIS
View all Asus M3A32-MVP DLX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
8. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default , the pin labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. M3A32-MVP DELUXE +5VSB_MB Chassis Signal GND ® CHASSIS M3A32-MVP DELUXE Chassis intrusion connector (Default) 9. ATX power connectors (24-pin EATXPWR; 8-pin ATX12V) These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. EATX12V EATXPWR GND GND GND GND M3A32-MVP DELUXE +3 Volts +12 Volts +12 Volts +5V Standby Power OK +12V DC +12V DC +12V DC +12V DC ® Ground +5 Volts Ground +5 Volts Ground M3A32-MVP DELUXE ATX power connectors +3 Volts +3 Volts Ground +5 Volts +5 Volts +5 Volts -5 Volts Ground Ground Ground PSON# Ground -12 Volts +3 Volts 2-34 Chapter 2: Hardware information