Asus M3A78-EMH HDMI User Manual - Page 81

IRQ-xx assigned to [PCI Device] When set to [PCI Device], the specific IRQ is free for use of PCI/PnP devices. When set to [Reserved], the IRQ is reserved for legacy ISA devices. Configuration options: [PCI Device] [Reserved] 2.4.7 USB Configuration The items in this menu allows you to change the USB-related features. Select an item then press to display the configuration options. Advanced USB Configuration BIOS SETUP UTILITY Module Version - 2.24.3-13.4 USB Devices Enabled: None USB Controllers Legacy USB Support USB 2.0 Controller Mode [Enabled] [Auto] [HiSpeed] Options Disabled Enabled Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2007, American Megatrends, Inc. The Module Version and USB Devices Enabled items show the auto-detected values. If no USB device is detected, the item shows None. USB Controllers [Enabled] Enables or disables USB Controllers. Configuration options: [Disabled] [Enabled] Legacy USB Support [Auto] Allows you to enable or disable support for Legacy USB storage devices, including USB flash drives and USB hard drives. Setting to Auto allows the system to detect the presence of USB devices at startup. If detected, the USB controller legacy mode is enabled. If no USB device is detected, the legacy USB support is disabled. Configuration options: [Disabled] [Enabled] [Auto] USB 2.0 Controller Mode [HiSpeed] Allows you to configure the USB 2.0 controller in HiSpeed (480 Mbps) or Full Speed (12 Mbps). Configuration options: [FullSpeed] [HiSpeed] ASUS M3A78-EMH HDMI 2-29