Asus M4A785D-M PRO User Manual - Page 48
Block Multi-Sector Transfer M [Auto]
View all Asus M4A785D-M PRO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
LBA/Large Mode [Auto] Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode if the device supports this mode, and if the device was not previously formatted with LBA mode disabled. Configuration options: [Disabled] [Auto] Block (Multi-Sector Transfer) M [Auto] Enables or disables data multi-sectors transfers. When set to [Auto], the data transfer from and to the device occurs multiple sectors at a time if the device supports multi-sector transfer feature. When set to [Disabled], the data transfer from and to the device occurs one sector at a time. Configuration options: [Disabled] [Auto] PIO Mode [Auto] Selects the PIO mode. Configuration options: [Auto] [0] [1] [2] [3] [4] DMA Mode [Auto] Selects the DMA mode. Configuration options: [Auto] SMART Monitoring [Auto] Sets the Smart Monitoring, Analysis, and Reporting Technology. Configuration options: [Auto] [Disabled] [Enabled] 32Bit Data Transfer [Enabled] Enables or disables 32-bit data transfer. Configuration options: [Disabled] [Enabled] 2.3.4 SATA Configuration The SATA Configuration menu allows you to configure your SATA device(s). Select an item then press to display the sub-menu. OnChip S-ATA Channel [Enabled] Allows you to disable or enable the OnChip S-ATA devices. Configuration options: [Enabled] [Disabled] The following item appears only when the OnChip S-ATA Channel item is set to [Enabled]. OnChip SATA Type [SATA] Allows you to select the SATA Mode. Configuration options: [SATA] [RAID] [AHCI] 2-8 E4711_M4A785D-M PRO.indb 8 Chapter 2: BIOS information 7/6/09 9:10:26 AM