Asus M4A88T-V EVO/USB3 User Manual - Page 62
System Information
View all Asus M4A88T-V EVO/USB3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
The following two items only appear when you set OnChip SATA Channel to [Enabled]. SATA Port1 - Port4 [IDE] Allows you to set the SATA configuration. [IDE] Set to [IDE] when you want to use the Serial ATA hard disk drives as Parallel ATA physical storage devices. [RAID] Set to [RAID] when you want to create a RAID configuration from the SATA hard disk drives. [AHCI] Set to [AHCI] when you want the SATA hard disk drives to use the AHCI (Advanced Host Controller Interface). The AHCI allows the onboard storage driver to enable advanced Serial ATA features that increases storage performance on random workloads by allowing the drive to internally optimize the order of commands. • When this item is set to [AHCI], the information of the SATA connectors 1-6 can be seen only under the OS environment or during POST. • For Windows® XP OS, you have to install the AHCI driver, so that you could use the SATA connectors 1-6 in AHCI mode under the OS environment. SATA Port5 - Port6 [IDE] Setting this item to [IDE] instead of [RAID] or [AHCI] allows the system to recognize the optical dirves connected to the SATA connectors 5 or 6 when installing OS. If you use a SATA optical drive to run the OS installation disk, we strongly recommend that you install the optical dirve to the SATA connectors 5/6 and set them to [IDE] mode. 2.3.5 System Information This menu gives you an overview of the general system specifications. The BIOS automatically detects the items in this menu. BIOS Information Displays the auto-detected BIOS information. Processor Displays the auto-detected CPU specification. System Memory Displays the auto-detected system memory. 2-12 Chapter 2: BIOS information