Asus M5A88-M EVO User Manual - Page 72
HW Monitor Configuration, Anti Surge Support [Enabled]
View all Asus M5A88-M EVO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Power on By PS/2 Keyboard [Disabled] Enables or disables PS/2 Keyboard to generate a wake event. Configuration options: [Disabled] [Space Bar] [Power Key] [Ctrl - Esc] Power on From S5 By RTC Alarm [Disabled] Enables or disables RTC to generate a wake event. Configuration options: [Disabled] [Enabled] 2.6.5 HW Monitor Configuration CPU / MB Temperature [xxxºC/xxxºF] or [Ignored] The onboard hardware monitor automatically detects and displays the motherboard and CPU temperatures. Select [Ignored] if you do not want the detected temperatures to be displayed. CPU Fan Speed [xxxxRPM] or [Ignored] / [N/A] Chassis Fan Speed [xxxxRPM] or [Ignored] / [N/A] Power Fan Speed [xxxxRPM] or [Ignored] / [N/A] The onboard hardware monitor automatically detects and displays the CPU / Chassis / Power fan speeds in rotations per minute (RPM). If the fan is not connected to the motherboard, the field shows N/A. Select [Ignored] if you do not wish to display the detected speed. VCORE Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage [xx.xxxV] or [Ignored] The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators. Select [Ignored] if you do not want the detected voltage to be displayed. CPU / Chassis Q-Fan Function [Enabled] Enables or disables the CPU / Chassis Q-Fan control feature. Configuration options: [Disabled] [Enabled] The following item appears only when you set CPU / Chassis Q-Fan Function to [Enabled]. CPU / Chassis Fan Speed Low Limit [200 RPM] Allows you to manually set a lower limit for the CPU / Chassis fan speed. If the CPU /Chassis fan speed is below the specified limit, the system sends out warning beeps. Configuration options: [500 RPM] [400 RPM] [300 RPM] [200 RPM] [100 RPM] [Ignored] CPU / Chassis Q-Fan Mode [Standard] This item appears only when you enable the CPU / Chassis Q-Fan Function feature and allows you to set the appropriate performance level of the CPU / Chassis fan. [Standard] Sets to [Standard] to make the CPU / Chassis fan automatically adjust depending on the CPU / Chassis temperature. [Silent] Sets to [Silent] to minimize the fan speed for quiet CPU / Chassis fan operation. [Turbo] Set to [Turbo] to achieve maximum CPU / Chassis fan speed. [Manual] Allows you to individually set the CPU / Chassis fan parameters. 2.6.6 Anti Surge Support [Enabled] Enables or disables the Anti Surge support. Configuration options: [Disabled] [Enabled] 2-24 Chapter 2: BIOS information