Asus MAXIMUS VII HERO User Guide - Page 53
Internal connectors, Intel, Z97 Serial ATA 6 Gb/s connectors 7-pin SATA6G_1-6 [red] - or z97 a
View all Asus MAXIMUS VII HERO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
1.2.8 Internal connectors 1. Intel® Z97 Serial ATA 6 Gb/s connectors (7-pin SATA6G_1-6 [red]) These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s signal cables. If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10 configuration with the Intel® Rapid Storage Technology through the onboard Intel® Z97 chipset. Chapter 1 • These connectors are set to [AHCI Mode] by default. If you intend to create a Serial ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID Mode]. Refer to section SATA Configuration for details. • Before creating a RAID set, refer to section RAID configurations or the manual bundled in the motherboard support DVD. • When using NCQ, set the SATA Mode in the BIOS to [AHCI Mode]. Refer to section SATA Configuration for details. ASUS MAXIMUS VII HERO 1-39