Asus ME-99B ME-99B User Manual - Page 34

ASUS ME-99B User's Manual, Audio Jack Header 25-1 pin AUDIOCON, Wake-On-Ring Connector 2-pin WOR,

Get Asus ME-99B PDF manuals and user guides View all Asus ME-99B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

3. H/W SETUP Connectors 3. HARDWARE SETUP 15) Audio Jack Header (25-1 pin AUDIOCON) This header is provided for audio input and output signals. Using a ribbon cable, you can connect this header to a back panel audio connecotr. 01 Audio Connector Module ME-99B ® ME-99B Audio Jack Header 21 Red stripe 2 1 Game/MIDI Port (15 pins) Line Output (1/8" phono) Microphone In (1/8" phono) Line Input (1/8" phono) 26 25 16) Wake-On-Ring Connector (2-pin WOR) This connector connects to an internal modem card with a Wake-On-Ring output. The connector powers up the system when a ringup packet or signal is received through the internal modem card. NOTE: For external modems, WakeOn-Ring is detected through the COM port. IMPORTANT: This feature requires that PWR Up On Modem Act is set to Enabled (see 4.5.1 Power Up Control). 01 ME-99B ® ME-99B Wake-On-Ring Connector WOR Pin1 Ground Pin2 PIXRI# 34 ASUS ME-99B User's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
34
ASUS ME-99B User’s Manual
Connectors
3.
H/W SETUP
3.
HARDWARE SETUP
15) Audio Jack Header (25-1 pin AUDIOCON)
This header is provided for audio input and output signals. Using a ribbon cable,
you can connect this header to a back panel audio connecotr.
ME-99B Audio Jack Header
Line Output (1/8” phono)
Line Input (1/8” phono)
Microphone In (1/8” phono)
Game/MIDI Port (15 pins)
Audio Connector Module
1
2
Red stripe
2
1
26
25
0
1
®
ME-99B
16) Wake-On-Ring Connector (2-pin WOR)
This connector connects to an internal modem card with a Wake-On-Ring out-
put. The connector powers up the system when a ringup packet or signal is re-
ceived through the internal modem card.
NOTE:
For external modems, Wake-
On-Ring
is detected through the COM port.
IMPORTANT:
This feature requires that
PWR Up On Modem Act
is set to
Enabled
(see
4.5.1 Power Up Control
).
ME-99B Wake-On-Ring Connector
WOR
0
1
®
ME-99B
Pin2 PIXRI#
Pin1 Ground